Error codes# 6 + 49

GEM Forum
1

Newbie here? I bought 2009 E2 with 12,00 miles in Nov 19. I have all three lights flashings (R-DL-DH) and no click from contactor going forward with error code #6. When I go to Rev lights only show R, beeping and I get click from contactor, starts to move and goes to error# 49. I’ve replaced Forward-Reverse
switch, no change? Any help would be appreciated. Thanks, HLF

2

Check direction wires at controller. P4 and P5. One but not both need to be near battery volts.
Throttle switch P7 needs to be <1.4v at zero throttle.

#49 is something else.

3

Thanks for your help! Turned out to be a bad controller.