2011 E6 SOC Question

[RS_E6]

The procedure to recalibrate the state of charge gauge can be found here:

2007 e6 turtling error

your gauge is out of calibration , easy fix . first thing run it till it goes into turtle and measure pack voltage . need to know if pack really is low . if it is then calibrate the volt gauge . do this with battery pack discharged to turtle level . turn key on 2: hold trip button down , push turn signal up then all the way down , then to center , release trip button . gauge will enter program mode . click turn signal up repeatedly until you get to soc , then press the trip meter one time .…