# Zivan charger on Li Ion "volt" 22s pack

**URL:** <https://community.electricforum.com/t/zivan-charger-on-li-ion-volt-22s-pack/24915>\
**Category:** GEM Forum\
**Created:** [August 14, 2022, 9:28pm UTC](https://community.electricforum.com/t/zivan-charger-on-li-ion-volt-22s-pack/24915 "2022-08-14T21:28:17Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![GEM\_or\_Ford\_Model\_A](https://avatars.discourse-cdn.com/v4/letter/g/f04885/32.png) [@GEM\_or\_Ford\_Model\_A](https://community.electricforum.com/u/GEM_or_Ford_Model_A)\
**Post date:** [August 14, 2022, 9:28pm UTC](https://community.electricforum.com/t/zivan-charger-on-li-ion-volt-22s-pack/24915/1 "2022-08-14T21:28:17Z")

</div>

I have a DIY setup. Volt 22s pack with ANT Bms. Zivan charger set on Gel setting according to the sticker charges at 10 amps then shifts to 3 amps. Charging is stopped by the BMS about 4.1/cell. Zivan goes into alarm.

Will this harm the charger or bms?

Any way to know what the other settings on the Zivan are? I would like a hard stop about 88 to 90 volts but a little lower would be ok. Charging speed is not important. The 54 ah pack can recharge overnight most of the time i plug it in.

I am happy with the charge it is getting now, but “she” hates to hear the two tone alarm when i am not around to unplug it. Or I thought a voltage sensing relay could cut zhe AC to the Zivan.