# Would either of these work as temp sensor replacement?

**URL:** <https://community.electricforum.com/t/would-either-of-these-work-as-temp-sensor-replacement/28055>\
**Category:** GEM Forum\
**Created:** [July 7, 2024, 3:25am UTC](https://community.electricforum.com/t/would-either-of-these-work-as-temp-sensor-replacement/28055 "2024-07-07T03:25:42Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sterling](https://avatars.discourse-cdn.com/v4/letter/s/f475e1/32.png) [@Sterling](https://community.electricforum.com/u/Sterling)\
**Post date:** [July 7, 2024, 3:25am UTC](https://community.electricforum.com/t/would-either-of-these-work-as-temp-sensor-replacement/28055/1 "2024-07-07T03:25:42Z")

</div>

> **[Blue Sky Energy Battery Replacement Temperature Sensor for Solar Boost Charge...](https://www.amazon.com/Wholesale-Sensors-Replacement-Battery-Warranty/dp/B07C9CFKYX)**
>
> Upgrade and optimize your solar energy system with our Wholesale Sensors Replacement for Blue Sky Energy Battery Temperature Sensor 930-0022-20. This reliable and durable sensor is designed specifically for use with Blue Sky Energy's Solar Boost...

> **[Amazon.com: Victron Energy Temperature Sensor for Victron Energy Quattro,...](https://www.amazon.com/Victron-Energy-Temperature-Sensor/dp/B08PHRGK13)**
>
> Buy Victron Energy Temperature Sensor for Victron Energy Quattro, MultiPlus and GX Device: Coolant Temperature - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

---

<div class="post-metadata">

**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\
**Post date:** [July 7, 2024, 11:57am UTC](https://community.electricforum.com/t/would-either-of-these-work-as-temp-sensor-replacement/28055/2 "2024-07-07T11:57:22Z")

</div>

for which charger? …

---

<div class="post-metadata">

**Author:** ![Sterling](https://avatars.discourse-cdn.com/v4/letter/s/f475e1/32.png) [@Sterling](https://community.electricforum.com/u/Sterling)\
**Post date:** [July 7, 2024, 3:40pm UTC](https://community.electricforum.com/t/would-either-of-these-work-as-temp-sensor-replacement/28055/3 "2024-07-07T15:40:11Z")

</div>

We bought two 2002 & 2003 e825. One has zivan other has Q. New to all this, but have been reading this site and downloaded and printed the tech manual (luv it) for these. I want to go ahead and replace both, one is cut off (q charger) and other is corroded. thanks for any advice.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [July 7, 2024, 3:59pm UTC](https://community.electricforum.com/t/would-either-of-these-work-as-temp-sensor-replacement/28055/4 "2024-07-07T15:59:32Z")

</div>

You dont need tbe zivan temp sensor. It plays a minor part in.thr final stages of the charge, its not critical. Just unplug the din connector and ypure all set

---

<div class="post-metadata">

**Author:** ![Sterling](https://avatars.discourse-cdn.com/v4/letter/s/f475e1/32.png) [@Sterling](https://community.electricforum.com/u/Sterling)\
**Post date:** [July 7, 2024, 4:06pm UTC](https://community.electricforum.com/t/would-either-of-these-work-as-temp-sensor-replacement/28055/5 "2024-07-07T16:06:12Z")

</div>

What else does the din connector control? And with it unplugged, do I have to worry about overcharging the batteries? Sorry if this is a dumb question.