# Wiring diagram for 2012 E2 **URL:** \ **Category:** GEM Forum\ **Created:** [May 29, 2017, 4:11pm UTC](https://community.electricforum.com/t/wiring-diagram-for-2012-e2/12417 "2017-05-29T16:11:48Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![SKMO](https://avatars.discourse-cdn.com/v4/letter/s/e47c2d/32.png) [@SKMO](https://community.electricforum.com/u/SKMO)\ **Post date:** [May 29, 2017, 4:11pm UTC](https://community.electricforum.com/t/wiring-diagram-for-2012-e2/12417/1 "2017-05-29T16:11:48Z")
any one know a source for a correct wiring diagram for a 2012 GEM E2? My GEM E2 (2012) has started blowing a 10 A fuse that is labeled Radio / PA . I have neither and when the fuse blows the car will not run. all other electrical items are working, lights, horn wipers etc. I can not find a wiring diagram for this year vehicle and have no idea where to look. suggestions are requested. ---
**Author:** ![Naetdogg](https://avatars.discourse-cdn.com/v4/letter/n/cc9497/32.png) [@Naetdogg](https://community.electricforum.com/u/Naetdogg)\ **Post date:** [May 29, 2017, 5:24pm UTC](https://community.electricforum.com/t/wiring-diagram-for-2012-e2/12417/2 "2017-05-29T17:24:30Z")
The only 10 A fuse used for the radio is the Radio Memory/Power in slot F10. The Radio Switch slot F3 takes a 1 A fuse. I would check your wiring to see if there is any loose connections on the Power Signal Distribution Module (PSDM) . I know that on the left hand side of the PSDM, spade 6 was used for constant 12v power for the radio memory but if nothings plugged into it I don’t see that giving you issues. ---
**Author:** ![Naetdogg](https://avatars.discourse-cdn.com/v4/letter/n/cc9497/32.png) [@Naetdogg](https://community.electricforum.com/u/Naetdogg)\ **Post date:** [May 29, 2017, 5:32pm UTC](https://community.electricforum.com/t/wiring-diagram-for-2012-e2/12417/3 "2017-05-29T17:32:08Z")
Also check your battery voltage on the PSDM. They are located on the lower left (+) and right (-) of the module. ---
**Author:** ![SKMO](https://avatars.discourse-cdn.com/v4/letter/s/e47c2d/32.png) [@SKMO](https://community.electricforum.com/u/SKMO)\ **Post date:** [May 30, 2017, 7:48pm UTC](https://community.electricforum.com/t/wiring-diagram-for-2012-e2/12417/4 "2017-05-30T19:48:41Z")
I found a pinched wire that was shorting out the parking brake circuit to be the cause still looking for a scource for the wiring diagram- Thanks