# Windows for GEMs with Factory Installed Hard Doors

**URL:** <https://community.electricforum.com/t/windows-for-gems-with-factory-installed-hard-doors/2845>\
**Category:** GEM Forum\
**Created:** [December 7, 2012, 2:56pm UTC](https://community.electricforum.com/t/windows-for-gems-with-factory-installed-hard-doors/2845 "2012-12-07T14:56:26Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![GEMmechanic](https://avatars.discourse-cdn.com/v4/letter/g/ecccb3/32.png) [@GEMmechanic](https://community.electricforum.com/u/GEMmechanic)\
**Post date:** [December 7, 2012, 2:56pm UTC](https://community.electricforum.com/t/windows-for-gems-with-factory-installed-hard-doors/2845/1 "2012-12-07T14:56:26Z")

</div>

Parts for the factory installed hard doors are not in the parts manual. I have found a list of all the windows and other parts for two and four door GEMs. These windows are expensive and break rather easy in cold weather. Several of these windows will ship oversize, which means an oversize price. Since GEM will not drop ship, it just cost us $200 to ship a $233 window. Try to pick up at the dealer if at all possible.

Daniel

Windows for two door GEM:  
0305-01029 front stationary window fits driver and passenger side  
0305-01032 rear stationary window fits driver and passenger side  
0305-01035 sliding window fits driver side  
0305-01030 sliding window fits passenger side

Windows for four passenger GEM:  
0305-01003 front door stationary window fits driver and passenger side  
0305-01012 rear door stationary window fits driver and passenger side  
0105-00727 front door sliding window fits driver side  
0105-00762 front door sliding window fits passenger side  
0105-00729 rear door sliding window fits driver side  
0105-00732 rear door sliding window fits passenger side

Other factory hard door parts:  
0605-00311 door latch mechanism fits driver side  
0605-00320 door latch mechanism fits passenger side  
0605-00312 exterior door handle fits driver side

---

<div class="post-metadata">

**Author:** ![LuvMyTJ](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/luvmytj/32/537_2.png) [@LuvMyTJ](https://community.electricforum.com/u/LuvMyTJ)\
**Post date:** [December 7, 2012, 6:45pm UTC](https://community.electricforum.com/t/windows-for-gems-with-factory-installed-hard-doors/2845/2 "2012-12-07T18:45:18Z")

</div>

Thanks for the data. You are a wealth of GEM information! :nod:

---

<div class="post-metadata">

**Author:** ![eSGEMColo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/esgemcolo/32/714_2.png) [@eSGEMColo](https://community.electricforum.com/u/eSGEMColo)\
**Post date:** [December 7, 2012, 11:17pm UTC](https://community.electricforum.com/t/windows-for-gems-with-factory-installed-hard-doors/2845/3 "2012-12-07T23:17:47Z")

</div>

thanks Dennis for tracking these numbers down… do you have numbers for the hardware as well? hinges and latches

Bob

---

<div class="post-metadata">

**Author:** ![shass](https://avatars.discourse-cdn.com/v4/letter/s/e79b87/32.png) [@shass](https://community.electricforum.com/u/shass)\
**Post date:** [September 16, 2019, 6:29pm UTC](https://community.electricforum.com/t/windows-for-gems-with-factory-installed-hard-doors/2845/4 "2019-09-16T18:29:48Z")

</div>

This thread is old, but helpful. I need a window for my 2010 eLXD, and see the part numbers above. I also need the trim the window slides in, see picture. They have broken on both sides. I think they became brittle in the sun. I do not believe the window assembly includes the trim with groove. Any suggestions?

 ![0722190847](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/4/47a5fbc15adad9787ad23dc500300043032692c7.jpeg)
