# Wheel Bearing Hero **URL:** \ **Category:** Ford NEVs\ **Tags:** nev\ **Created:** [May 28, 2023, 6:05am UTC](https://community.electricforum.com/t/wheel-bearing-hero/26460 "2023-05-28T06:05:52Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![C4202K2](https://avatars.discourse-cdn.com/v4/letter/c/49beb7/32.png) [@C4202K2](https://community.electricforum.com/u/C4202K2)\ **Post date:** [May 28, 2023, 6:05am UTC](https://community.electricforum.com/t/wheel-bearing-hero/26460/1 "2023-05-28T06:05:52Z")
Can anyone help me with the process for replacing the front and rear wheel bearings on the Ford Think? I’ve done golf carts before but nothing like this. ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [May 28, 2023, 3:44pm UTC](https://community.electricforum.com/t/wheel-bearing-hero/26460/2 "2023-05-28T15:44:50Z")
Easy if you have a press. You take the hub assembly off and press out the spindle. Then press out the bearings. Same as most cars these days. I’ve done it with a sledgehammer, but you need to know what you’re doing. You could take the hub assemblies to a shop and have them press in the new bearings. It’s quick for someone who knows what they’re doing. ---
**Author:** ![C4202K2](https://avatars.discourse-cdn.com/v4/letter/c/49beb7/32.png) [@C4202K2](https://community.electricforum.com/u/C4202K2)\ **Post date:** [May 28, 2023, 4:36pm UTC](https://community.electricforum.com/t/wheel-bearing-hero/26460/3 "2023-05-28T16:36:02Z")
Thanks!!! I have a press and the front hubs off, just wanted to make sure before I did anything bad. Also I’m struggling getting the rear hubs removed, any tricks? ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [May 29, 2023, 12:59am UTC](https://community.electricforum.com/t/wheel-bearing-hero/26460/4 "2023-05-29T00:59:05Z")
Remove wheels. Remove brake line from wheel cylinder. Remove parking brake cable at hub. Remove the four bolts that hold the hub assembly. Remove axle nut. Use a pneumatic hammer or air chisel to remove axles from hubs. ---
**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\ **Post date:** [May 29, 2023, 6:55am UTC](https://community.electricforum.com/t/wheel-bearing-hero/26460/5 "2023-05-29T06:55:42Z")
> [@C4202K2](#): > > Wheel Bearing Hero… What are song titles by Foreigner that the record execs rejected? ---
**Author:** ![Buba](https://avatars.discourse-cdn.com/v4/letter/b/ce73a5/32.png) [@Buba](https://community.electricforum.com/u/Buba)\ **Post date:** [July 7, 2023, 3:15am UTC](https://community.electricforum.com/t/wheel-bearing-hero/26460/6 "2023-07-07T03:15:29Z")
Hello David , I am new to this group and see that your the go to guy and very helpful, I have ford think truck style , very cool , I replaced batteries and did not change algorithms on delta q 912 7200 , I have run the new batteries for only a couple months during only on weekends mostly , I plugged in to charge and notice the charger was dead , no lights on it at all , I checked fuses and thought the charger must be bad , I sent it in to FSIP and asked for check and advise , they said it was bad and rebuilt it , they never asked about what my new batteries are ? They just rebuilt it , I got it back and plugged it back as it was , plugged in 110 volt and still no power , my guess was there was not anything wrong with charger ? I found wires from the 110 volt plug that had melted and cleaned all that up and plugged in , it came on and has steady blinking yellow lite and solid ligjt on very top IIIII I am wondering if there is a repair shop that is close to me that would be familiar with the think cart , it has couple issues and I want to keep the cart , my dogs love it ! Haha , I am located in Albuquerque NM ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [July 7, 2023, 12:06pm UTC](https://community.electricforum.com/t/wheel-bearing-hero/26460/7 "2023-07-07T12:06:32Z")
I don’t know of anyone in that area. Take a video of the charger lights and post it here or just contact fsip as it will be warranty if there is anything wrong with the charger.