# Thinking about a lithium conversion

**URL:** <https://community.electricforum.com/t/thinking-about-a-lithium-conversion/14309>\
**Category:** GEM Forum\
**Created:** [August 14, 2018, 4:52pm UTC](https://community.electricforum.com/t/thinking-about-a-lithium-conversion/14309 "2018-08-14T16:52:30Z")\
**Posts on this page:** 1\
**Showing post:** 80

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [September 5, 2019, 3:07am UTC](https://community.electricforum.com/t/thinking-about-a-lithium-conversion/14309/80 "2019-09-05T03:07:36Z")

</div>

Here’s a post of a picture of the leaf module conversion I did on a 2002 e825 in San Diego.

> [@Nissan Leaf Gen 4 battery conversion](https://community.electricforum.com/t/nissan-leaf-gen-4-battery-conversion/14535/66):
>
> Strapped down and rear brace in place. Will go with .25" aluminum eventually. Only one BMS module there now. Will 3D print a couple of housings for 3 modules each. Cover the battery and seal the modules(wireless).

---

_[View the full topic](https://community.electricforum.com/t/thinking-about-a-lithium-conversion/14309)._