# Think Service Manual **URL:** \ **Category:** Ford NEVs\ **Created:** [May 21, 2021, 9:39pm UTC](https://community.electricforum.com/t/think-service-manual/21505 "2021-05-21T21:39:27Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [October 12, 2021, 3:56pm UTC](https://community.electricforum.com/t/think-service-manual/21505/21 "2021-10-12T15:56:36Z")
Yes you need to get the voltage above 68 volts before the charger will work so that’s your first step ---
**Author:** ![TerryV](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TerryV](https://community.electricforum.com/u/TerryV)\ **Post date:** [October 12, 2021, 4:11pm UTC](https://community.electricforum.com/t/think-service-manual/21505/22 "2021-10-12T16:11:23Z")
Batteries are shot as tried to charge each individual & no good. So new batteries which I expected. Next thing is power cord from outlet to car. None with car, Was told just to use heavy extension cord. Will this work. Will be plugged into gfci outlet in the workshop. ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [October 12, 2021, 4:18pm UTC](https://community.electricforum.com/t/think-service-manual/21505/23 "2021-10-12T16:18:15Z")
Yes a heavy duty extension cord will work ---
**Author:** ![TerryV](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TerryV](https://community.electricforum.com/u/TerryV)\ **Post date:** [October 14, 2021, 1:09am UTC](https://community.electricforum.com/t/think-service-manual/21505/24 "2021-10-14T01:09:36Z")
I did buy replacement batteries to power it up. Figured could use in motorhome or sell worst case. They are wet cell napa 8270 which is what was in it. Turned key on and brake, battery, speed and trip lit up in cluster but no response from accel pedal and no lights, signals, horn. 78.6 volts at batteries. There is also no ring with the reset button on the cluster. Good news has newer yellow delta Q charger & it is working. Going to follow the No enable chart but thinking going to have to replace the cluster as there is no power to anything but the cluster. ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [October 15, 2021, 1:00pm UTC](https://community.electricforum.com/t/think-service-manual/21505/25 "2021-10-15T13:00:38Z")
If the brake light is on make sure the parking brake handle is all the way down. Check for codes ---
**Author:** ![TerryV](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TerryV](https://community.electricforum.com/u/TerryV)\ **Post date:** [October 15, 2021, 6:25pm UTC](https://community.electricforum.com/t/think-service-manual/21505/26 "2021-10-15T18:25:37Z")
Found mouse had a nice he behind cluster and had chewed a wire. Have full cluster now and drive motor works as axles spin. Still no power to 12 volt systems, lights signals etc. All fuses test good with ohm meter. Can’t check for codes yet as trim with reset button missing. Know where to get a good one? Manual says to check dc/dc converter in front which is this weekend project. Thanks very much for the manuals as they are a big help. Still have to replace all the brakes( some pads feel off when took hubs off and wheel cylinders(all leaking). Then dry rotted tires to replace. ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [October 16, 2021, 5:17pm UTC](https://community.electricforum.com/t/think-service-manual/21505/27 "2021-10-16T17:17:24Z")
Checking the converters is easy. The two orange wires are battery pack voltage and ground going in so you should have around 72 volts. The other two wires are 12 volt power and ground coming out of the converter. So if you have 72 volts going in and don’t have around 12 volts coming out the converter is bad. A guy on ebay use to sell a switch check on ebay so you could bypass the reset button ---
**Author:** ![TerryV](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TerryV](https://community.electricforum.com/u/TerryV)\ **Post date:** [October 16, 2021, 5:37pm UTC](https://community.electricforum.com/t/think-service-manual/21505/28 "2021-10-16T17:37:12Z")
Tested it this morning and the converter is bad. Looking for all the parts this afternoon to make it road worthy. At least to ride around the farm and my county roads. I will check into the bypass and thanks for the tip. Just like any other hobby more $. But this will go faster than the gas golf carts I have worked on. ---
**Author:** ![SMulherron](https://avatars.discourse-cdn.com/v4/letter/s/50afbb/32.png) [@SMulherron](https://community.electricforum.com/u/SMulherron)\ **Post date:** [November 12, 2021, 5:59pm UTC](https://community.electricforum.com/t/think-service-manual/21505/29 "2021-11-12T17:59:06Z")
David- I could sure use the service manual as well- looking for fix-it information on the steering box… we ran the right front wheel into a tree and the steering wheel and front wheels are locked up. My email is [mulherron1@gmail.com](mailto:mulherron1@gmail.com) Thanks -Steve ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [November 12, 2021, 6:23pm UTC](https://community.electricforum.com/t/think-service-manual/21505/30 "2021-11-12T18:23:55Z")
Manual sent \>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\> ---
**Author:** ![Jondaro321](https://avatars.discourse-cdn.com/v4/letter/j/eada6e/32.png) [@Jondaro321](https://community.electricforum.com/u/Jondaro321)\ **Post date:** [November 13, 2021, 8:20pm UTC](https://community.electricforum.com/t/think-service-manual/21505/31 "2021-11-13T20:20:37Z")
Did you get a copy of the service manual for your Ford Think? If so would you mind sending me a copy at [jondaro321@gmail.com](mailto:jondaro321@gmail.com) ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [November 14, 2021, 1:42am UTC](https://community.electricforum.com/t/think-service-manual/21505/32 "2021-11-14T01:42:28Z")
> [@Jondaro321](#): > > [jondaro321@gmail.com](mailto:jondaro321@gmail.com) Manual sent \>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\> ---
**Author:** ![traviswright](https://avatars.discourse-cdn.com/v4/letter/t/97f17d/32.png) [@traviswright](https://community.electricforum.com/u/traviswright)\ **Post date:** [November 17, 2021, 11:03pm UTC](https://community.electricforum.com/t/think-service-manual/21505/34 "2021-11-17T23:03:38Z")
Hey David - I am brand new to the Ford Think owners club, and could really use a copy of the service manual. Can I get you to email to [trw870@gmail.com](mailto:trw870@gmail.com)? ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [November 18, 2021, 2:33pm UTC](https://community.electricforum.com/t/think-service-manual/21505/35 "2021-11-18T14:33:04Z")
Manual sent \>\>\>\>\>\>\>\>\>\>\>\>\> ---
**Author:** ![traviswright](https://avatars.discourse-cdn.com/v4/letter/t/97f17d/32.png) [@traviswright](https://community.electricforum.com/u/traviswright)\ **Post date:** [November 18, 2021, 2:52pm UTC](https://community.electricforum.com/t/think-service-manual/21505/36 "2021-11-18T14:52:46Z")
Thank you sir! Although I am not seeing it in my inbox…I wonder if gmail decided I didn’t want it for some reason. Maybe try this email instead? [travis.wright@qtsdatacenters.com](mailto:travis.wright@qtsdatacenters.com) ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [November 18, 2021, 11:09pm UTC](https://community.electricforum.com/t/think-service-manual/21505/37 "2021-11-18T23:09:54Z")
Just sent it. First time having a problem with gmail. Let me know if it doesn’t work. I’m in Mexico on vacation so that might be the problem. ---
**Author:** ![SNOWPROB](https://avatars.discourse-cdn.com/v4/letter/s/cab0a1/32.png) [@SNOWPROB](https://community.electricforum.com/u/SNOWPROB)\ **Post date:** [November 21, 2021, 5:38pm UTC](https://community.electricforum.com/t/think-service-manual/21505/38 "2021-11-21T17:38:52Z")
Hi David (and all), I’m working on repairing my parents Think, and I’d very much appreciate the manual. It’d make this gift much easier… [m3mclean@gmail.com](mailto:m3mclean@gmail.com) Thanks! ---
**Author:** ![Captaincurt88](https://avatars.discourse-cdn.com/v4/letter/c/258eb7/32.png) [@Captaincurt88](https://community.electricforum.com/u/Captaincurt88)\ **Post date:** [December 11, 2021, 11:52pm UTC](https://community.electricforum.com/t/think-service-manual/21505/39 "2021-12-11T23:52:00Z")
Hi David I just purchased a Ford think and stumbled on this thread looking for help. Could I please have the service manual? [curtr109@gmail.com](mailto:curtr109@gmail.com) Thanks a lot I look forward to joining the group on here ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [December 12, 2021, 3:13pm UTC](https://community.electricforum.com/t/think-service-manual/21505/40 "2021-12-12T15:13:52Z")
Manual sent \>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\> ---
**Author:** ![Electricjd](https://avatars.discourse-cdn.com/v4/letter/e/e19adc/32.png) [@Electricjd](https://community.electricforum.com/u/Electricjd)\ **Post date:** [March 22, 2022, 3:56am UTC](https://community.electricforum.com/t/think-service-manual/21505/41 "2022-03-22T03:56:43Z")
Hi David, Researching a low voltage indicator on my QuiQ CHARGER ( 2 red flashes) could I possibly get a copy of the manual? Checked batteries 5 are volt meter showing 12.6x ish and 1 is 10.2x ish. Charged batteries with charger only get to 3 bars on the Think dash. I see in this thread there is possibly a reset somewhere in the circuit. [Electricjd@yahoo.com](mailto:Electricjd@yahoo.com) Thanks in advance [Previous page](https://community.electricforum.com/t/think-service-manual/21505.md?page=1) [Next page](https://community.electricforum.com/t/think-service-manual/21505.md?page=3)