# Think Display **URL:** \ **Category:** Ford NEVs\ **Created:** [May 17, 2014, 11:09am UTC](https://community.electricforum.com/t/think-display/4236 "2014-05-17T11:09:27Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Larry2](https://avatars.discourse-cdn.com/v4/letter/l/779978/32.png) [@Larry2](https://community.electricforum.com/u/Larry2)\ **Post date:** [May 17, 2014, 11:09am UTC](https://community.electricforum.com/t/think-display/4236/1 "2014-05-17T11:09:27Z")
I just bought a reconditioned think, runs and looks great—But— here it comes 🙂 Its been reprogramed and clocks on the road at 35, but when I get over 25 the whole display go’s blank, when I slow back down to 25 it comes right back on? Thinking this might have something to do with controller? Any ideas out there ?? ---
**Author:** ![CharlesChipMorris](https://avatars.discourse-cdn.com/v4/letter/c/7feea3/32.png) [@CharlesChipMorris](https://community.electricforum.com/u/CharlesChipMorris)\ **Post date:** [May 28, 2014, 2:35pm UTC](https://community.electricforum.com/t/think-display/4236/2 "2014-05-28T14:35:37Z")
I have not confirmed anywhere that works on the low speed EV’s, except golf cart places that seem to specialize in certain brands. The Foursom website in Woodburn states they work on low speed electric cars but also says to check with them ahead of time if it is a non Club Car. Might be worth a call- ---
**Author:** ![flipper65](https://avatars.discourse-cdn.com/v4/letter/f/ce7236/32.png) [@flipper65](https://community.electricforum.com/u/flipper65)\ **Post date:** [January 1, 2015, 6:57pm UTC](https://community.electricforum.com/t/think-display/4236/3 "2015-01-01T18:57:26Z")
You may have a cracked or broken magnet in your speed sensor located on the end of the motor. Black plastic piece 1.5" in diameter, held on with 2 screws. ---
**Author:** ![GEMmechanic](https://avatars.discourse-cdn.com/v4/letter/g/ecccb3/32.png) [@GEMmechanic](https://community.electricforum.com/u/GEMmechanic)\ **Post date:** [January 1, 2015, 11:13pm UTC](https://community.electricforum.com/t/think-display/4236/4 "2015-01-01T23:13:58Z")
You may wish to contact whomever reprogrammed the controller. I am not as familiar with the Th!nk as I am the GEM. Daniel