# T2 controller Issues

**URL:** <https://community.electricforum.com/t/t2-controller-issues/5751>\
**Category:** GEM Forum\
**Created:** [January 24, 2016, 6:16pm UTC](https://community.electricforum.com/t/t2-controller-issues/5751 "2016-01-24T18:16:27Z")\
**Posts on this page:** 13\
**Page:** 2

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [February 23, 2016, 6:54am UTC](https://community.electricforum.com/t/t2-controller-issues/5751/21 "2016-02-23T06:54:51Z")

</div>

Grant

Leave your fast settings where they are and set your turf settings for economy. Run in turf mode

Should give you 3+ more miles of range

Start here and we can go further based on results.

Rodney

#6 35 #11 105

In fast mode if your spinning you might want to set #3 to 20

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [February 23, 2016, 7:50am UTC](https://community.electricforum.com/t/t2-controller-issues/5751/22 "2016-02-23T07:50:34Z")

</div>

Ok great I will adjust #6 and #11 should the car be in “turf” when making these changes and what does 6 and 11 effect

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [February 23, 2016, 8:12am UTC](https://community.electricforum.com/t/t2-controller-issues/5751/23 "2016-02-23T08:12:44Z")

</div>

6 brings up acceleration in turf and reverse 11 should give you about 30 mph in turf

Do an audit of all your numbers and copy me on them.

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [February 23, 2016, 8:31am UTC](https://community.electricforum.com/t/t2-controller-issues/5751/24 "2016-02-23T08:31:06Z")

</div>

Ok same question does the car need to be in turf mode when adjusting #6 and #11

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [February 23, 2016, 9:30am UTC](https://community.electricforum.com/t/t2-controller-issues/5751/25 "2016-02-23T09:30:28Z")

</div>

No 1-15 pusha da button 16 - 30 Turf mode with cont 3 1 on up Fast mode with cont.

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [February 23, 2016, 11:13am UTC](https://community.electricforum.com/t/t2-controller-issues/5751/26 "2016-02-23T11:13:53Z")

</div>

I changed my controller to the suggested settings and it didn’t seem to make a difference at best it was 6% better. Example my uses all route gets me home with 60% I got home with 66%

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [February 23, 2016, 11:43am UTC](https://community.electricforum.com/t/t2-controller-issues/5751/27 "2016-02-23T11:43:39Z")

</div>

We can do more

I need to know all your numbers.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [February 23, 2016, 11:47am UTC](https://community.electricforum.com/t/t2-controller-issues/5751/28 "2016-02-23T11:47:34Z")

</div>

If I make or purchase a battery capacity meter, would there be interest on the forum in passing it around?

Have access to good load resistors. Like to find a use for them.

I’m thinking an overnight test \<10amp would be small enough to mail easily.

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [February 24, 2016, 2:06pm UTC](https://community.electricforum.com/t/t2-controller-issues/5751/29 "2016-02-24T14:06:36Z")

</div>

David: how or what would your device do.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [February 24, 2016, 2:29pm UTC](https://community.electricforum.com/t/t2-controller-issues/5751/30 "2016-02-24T14:29:18Z")

</div>

You would just connect to fully charged batteries over night.  
The meter records the amp-hours.  
Could of course build with a faster discharge, but it would be pretty heavy, and who’s in a hurry?

That is the only real test of battery capacity. Just like measuring how much gas is in your tank.

Any golf cart shop should have one.

I’m going to make a new one in any case. The one I have doesn’t do 72 volts.

One of my gems seems to have battery issues.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [February 24, 2016, 4:46pm UTC](https://community.electricforum.com/t/t2-controller-issues/5751/31 "2016-02-24T16:46:58Z")

</div>

These should work.  
7.2 amps will discharge 100ah in \<14 hrs.

Pushing a little watt wise. Loaded to 85% @ 72 volts.  
I’ll see if it needs a fan.

---

<div class="post-metadata">

**Author:** ![drogers](https://avatars.discourse-cdn.com/v4/letter/d/e495f1/32.png) [@drogers](https://community.electricforum.com/u/drogers)\
**Post date:** [March 4, 2016, 10:16am UTC](https://community.electricforum.com/t/t2-controller-issues/5751/32 "2016-03-04T10:16:09Z")

</div>

[quote=Inwo;29190]If I make or purchase a battery capacity meter, would there be interest on the forum in passing it around?

Have access to good load resistors. Like to find a use for them.

I’m thinking an overnight test \<10amp would be small enough to mail easily.[/quote]

I’d definitely be interested - would it handle a LiFePO pack (~86V) as well?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [March 4, 2016, 10:20am UTC](https://community.electricforum.com/t/t2-controller-issues/5751/33 "2016-03-04T10:20:36Z")

</div>

Yes, meter should be in any day. Load resistors are picked out.

To be honest, I could sell load bank for $50 and the meters are \< $50.

Not much more than shipping back and forth.

[Previous page](https://community.electricforum.com/t/t2-controller-issues/5751.md?page=1)
