# Surepower recall upgrade

**URL:** <https://community.electricforum.com/t/surepower-recall-upgrade/25448>\
**Category:** GEM Forum\
**Created:** [November 19, 2022, 3:06am UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448 "2022-11-19T03:06:37Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![AZ\_speedster](https://avatars.discourse-cdn.com/v4/letter/a/b38774/32.png) [@AZ\_speedster](https://community.electricforum.com/u/AZ_speedster)\
**Post date:** [November 19, 2022, 3:06am UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/1 "2022-11-19T03:06:37Z")

</div>

I am looking for more information on the dc/dc relay that is called for in the recall instructions. I can’t seem to source one. What is this relays purpose? Is there a like part that can be used in its place? Maybe alternate part number(s)?

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [November 19, 2022, 5:28am UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/2 "2022-11-19T05:28:06Z")

</div>

The relay the factory uses is an odd one. It looks like this.  
Location is typically on Pass side over by/around the DC Converter.

 ![12x72 relay](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/2/2381cf0a76ccd08013326b4a94d38dd9db7e2420.jpeg)

It’s purpose is to take the Keyed 12v and switch B+ for the Controller.

No, You don’t need to replace it with the same part.  
A bosch Cube relay will do in a pinch.

![relay cube](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/5/56e1b58c782e531b2d6186fd0ac4abcd37e5d7da.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2022, 5:30am UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/3 "2022-11-19T05:30:53Z")

</div>

Sorry, too slow. Thought op refered to the timer, as a relay should be pretty easy to find.  
Called a cube timer generically or just solid state timer.  
From memory it’s a time off delay. TOF  
12vdc, also from memory, non-isolated.  
If it has a raised rectangle part, then it incoporates an isolated dry contact relay output.  
There are many manufacturers of these. Artisan, ssic, nte, etc.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [November 19, 2022, 5:35am UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/4 "2022-11-19T05:35:54Z")

</div>

I think we are talking about two different components.  
The Delay off timer looks like this.

 ![Relay&timer](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/c/cff535acf91eb132a06865ec9fcebc8db1aae387.jpeg)

This timer holds the 12v Acc in the ON state for the set time (~20 Secs) after the key is switched OFF.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2022, 5:38am UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/5 "2022-11-19T05:38:19Z")

</div>

While on the subject. Seems dealer upgrade help is losing steam.  
What is refered to as the open board dc converter is actually a logic board with a dc converter attatched.  
The converter portion can be replaced leaving the original logic in place. Iirc.  
Fire hazard was from the current carrying connectios and the converter itself. Also iirc.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [November 19, 2022, 5:45am UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/6 "2022-11-19T05:45:39Z")

</div>

Interesting thought. There isn’t even much actual logic on the old PWB. It is actually replaced by some minor rewiring, a relay, and a timer nobody is quite sure why it is really there.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2022, 11:48am UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/7 "2022-11-19T11:48:30Z")

</div>

The timer on the pcb is just a few discrete components. I doubt they have many transistor failures.  
My guess is that the fires reported, are traces and connections overheating. A simple fix but not from a big company liabiliy standpoint.  
If not for the legal issues we could be the cluster guys. Adding an off the shelf converter to the oem pcb.  
Not sure if oem is a 5 wire converter or not. Iirc there is a small 12v supply on board for start up. Now days a $5 part.

Kind of late in the game, but if most of the upgrades have been claimed, may be time for a cheap fix.

---

<div class="post-metadata">

**Author:** ![AZ\_speedster](https://avatars.discourse-cdn.com/v4/letter/a/b38774/32.png) [@AZ\_speedster](https://community.electricforum.com/u/AZ_speedster)\
**Post date:** [November 19, 2022, 8:18pm UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/8 "2022-11-19T20:18:35Z")

</div>

Sorry for the confusion. I was not referring to the timer relay. That I can find and know its purpose. I was referring to the dc/dc relay.

![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/62b40cec9daab0a24940ea4c8406c9984ad1d854.jpeg)

This would be the part in question.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2022, 10:34pm UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/9 "2022-11-19T22:34:19Z")

</div>

Im sure Byron knows. I assume its to switch the 72v power from 12v control.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [November 20, 2022, 4:54am UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/10 "2022-11-20T04:54:04Z")

</div>

See Post #2 above ☝ I guess you missed it?

---

<div class="post-metadata">

**Author:** ![AZ\_speedster](https://avatars.discourse-cdn.com/v4/letter/a/b38774/32.png) [@AZ\_speedster](https://community.electricforum.com/u/AZ_speedster)\
**Post date:** [November 20, 2022, 7:10pm UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/11 "2022-11-20T19:10:25Z")

</div>

After cross referencing the schematic from the service manual against the schematic from recall instructions, I think I got vertigo…

Yep. Post 2 has it. Thanks. For those looking for what it does, it relays 72v switched from the key to various components.

---

<div class="post-metadata">

**Author:** ![AZ\_speedster](https://avatars.discourse-cdn.com/v4/letter/a/b38774/32.png) [@AZ\_speedster](https://community.electricforum.com/u/AZ_speedster)\
**Post date:** [November 25, 2022, 4:19am UTC](https://community.electricforum.com/t/surepower-recall-upgrade/25448/12 "2022-11-25T04:19:42Z")

</div>

Also, for reference. I found what I believe to be the part. Numbered J115F31A12VDCS.9

> **[J115F31A12VDCS.9 | Digi-Key Electronics](https://www.digikey.com/en/products/detail/cit-relay-and-switch/J115F31A12VDCS-9/12503547?utm_medium=email&utm_source=oce&utm_campaign=4251_OCE22RT&utm_content=productdetail_US&utm_cid=3353648&so=78815321&mkt_tok=MDI4LVNYSy01MDcAAAGIN8hzPv4UdIxeed1C0MOWKgleuaFrsXI6E1usphR3Njv3uzaOM_MQwvT8fRuaviyFeNKUnSvztllJvV-ifPQPVBROXlbqtbZkv3ZL4qNc)**
>
> Order today, ships today. J115F31A12VDCS.9 – General Purpose Relay SPST-NO (1 Form A) 12VDC Coil Chassis Mount from CIT Relay and Switch. Pricing and Availability on millions of electronic components from Digi-Key Electronics.
