# State Of Charge Setup GE T3/T4

**URL:** <https://community.electricforum.com/t/state-of-charge-setup-ge-t3-t4/6143>\
**Category:** Battery & Chargers\
**Created:** [June 20, 2016, 10:21am UTC](https://community.electricforum.com/t/state-of-charge-setup-ge-t3-t4/6143 "2016-06-20T10:21:14Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [June 20, 2016, 10:21am UTC](https://community.electricforum.com/t/state-of-charge-setup-ge-t3-t4/6143/1 "2016-06-20T10:21:14Z")

</div>

Thank you Brian

1. Turn the key on.

2. Push and release the TRIP/ODOMETER switch until it’s showing the  
odometer.

3. While holding the switch down, turn the RIGHT signal on, then the LEFT  
signal, then return the blinker to the center.

4. Release the TRIP/ODOMETER switch. You should be seeing data (P0105) on  
the display now.

5. Turn the RIGHT signal on, then off repeatedly until the display reads:  
SOC (State Of Charge).

6. Push and release the TRIP/ODOMETER switch. Now it’s remaining capacity in  
percent.

7. You can now raise (or lower, for that matter) the SOC with the blinker  
switch.

8. When you’re happy, Push and release the TRIP/ODOMETER switch. The display  
reads: DONE.

9. Turn the key off.

---

<div class="post-metadata">

**Author:** ![emiliofcastillo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/emiliofcastillo/32/722_2.png) [@emiliofcastillo](https://community.electricforum.com/u/emiliofcastillo)\
**Post date:** [December 18, 2016, 8:43pm UTC](https://community.electricforum.com/t/state-of-charge-setup-ge-t3-t4/6143/2 "2016-12-18T20:43:49Z")

</div>



---

<div class="post-metadata">

**Author:** ![Troyin909](https://avatars.discourse-cdn.com/v4/letter/t/57b2e6/32.png) [@Troyin909](https://community.electricforum.com/u/Troyin909)\
**Post date:** [April 5, 2017, 1:33pm UTC](https://community.electricforum.com/t/state-of-charge-setup-ge-t3-t4/6143/3 "2017-04-05T13:33:57Z")

</div>

What will tell me what the rest of the settings mean when you’re in the state of charge settings. I see a few extra options but don’t understand what they are.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [April 5, 2017, 3:35pm UTC](https://community.electricforum.com/t/state-of-charge-setup-ge-t3-t4/6143/4 "2017-04-05T15:35:27Z")

</div>

Join the club. 🙂  
Use your super social power to find out for the rest of us…

---

<div class="post-metadata">

**Author:** ![Troyin909](https://avatars.discourse-cdn.com/v4/letter/t/57b2e6/32.png) [@Troyin909](https://community.electricforum.com/u/Troyin909)\
**Post date:** [April 6, 2017, 7:30am UTC](https://community.electricforum.com/t/state-of-charge-setup-ge-t3-t4/6143/5 "2017-04-06T07:30:00Z")

</div>

LOL that’s my goal. Not many Gem folks out my way. But that won’t stop me.