# Starting my GEM LED light conversion - separate electrical system

**URL:** https://community.electricforum.com/t/starting-my-gem-led-light-conversion-separate-electrical-system/16694
**Category:** GEM Forum
**Created:** [July 26, 2019, 12:14am UTC](https://community.electricforum.com/t/starting-my-gem-led-light-conversion-separate-electrical-system/16694 "2019-07-26T00:14:57Z")
**Posts on this page:** 1
**Showing post:** 19

<div class="post-metadata">

### Author: ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)
#### Post date: [July 28, 2019, 1:55pm UTC](https://community.electricforum.com/t/starting-my-gem-led-light-conversion-separate-electrical-system/16694/19 "2019-07-28T13:55:38Z")

</div>

I was thinking somthing like this

> [@Led light bar install](https://community.electricforum.com/t/led-light-bar-install/14090/13):
>
> Hey Here is another TIP. This $10 wire kit from Auxbeam is awesome. You have way more then $10 in just wire in this kit. It makes hooking up the light bar a 4 wire install Red= goes to cars 10amp Key power Black= Ground. Black= light bar ground White= Light bar power. It come with a small dash mounted On Off switch that you can attach to your dash to turn the light bar on or off OR you can cut the switch off and attach it to the Floor mounted on off switch that I use. Here is a link to the…

---

_[View the full topic](https://community.electricforum.com/t/starting-my-gem-led-light-conversion-separate-electrical-system/16694)._