# Splash guards? **URL:** \ **Category:** GEM Forum\ **Created:** [March 13, 2016, 8:09pm UTC](https://community.electricforum.com/t/splash-guards/5839 "2016-03-13T20:09:22Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![IssaquahWA1979](https://avatars.discourse-cdn.com/v4/letter/i/91b2a8/32.png) [@IssaquahWA1979](https://community.electricforum.com/u/IssaquahWA1979)\ **Post date:** [March 13, 2016, 8:09pm UTC](https://community.electricforum.com/t/splash-guards/5839/1 "2016-03-13T20:09:22Z")
can anyone please post pictures of how these plastic firewall puzzle pieces are supposed to be installed? I’m referring to the hard plastic shields not the rubber flaps… ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [March 13, 2016, 9:09pm UTC](https://community.electricforum.com/t/splash-guards/5839/2 "2016-03-13T21:09:55Z")
I hate to show this, but are these the ones? :eek: ---
**Author:** ![IssaquahWA1979](https://avatars.discourse-cdn.com/v4/letter/i/91b2a8/32.png) [@IssaquahWA1979](https://community.electricforum.com/u/IssaquahWA1979)\ **Post date:** [March 13, 2016, 9:25pm UTC](https://community.electricforum.com/t/splash-guards/5839/3 "2016-03-13T21:25:41Z")
> [@Inwo;29518](#): > > I hate to show this, but are these the ones? :eek: not sure, here they are… ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [March 13, 2016, 9:53pm UTC](https://community.electricforum.com/t/splash-guards/5839/4 "2016-03-13T21:53:20Z")
Mine are more 3d molded. green Yours looks flat. Mine has rubber ones hanging from frame on side of controller. red Maybe that’s where they go? My rubber one is bad. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [March 13, 2016, 10:06pm UTC](https://community.electricforum.com/t/splash-guards/5839/5 "2016-03-13T22:06:54Z")
Picture from web… ---
**Author:** ![IssaquahWA1979](https://avatars.discourse-cdn.com/v4/letter/i/91b2a8/32.png) [@IssaquahWA1979](https://community.electricforum.com/u/IssaquahWA1979)\ **Post date:** [March 14, 2016, 10:18am UTC](https://community.electricforum.com/t/splash-guards/5839/6 "2016-03-14T10:18:18Z")
thanks for the pics and trying to help, hopefully someone will know what the pieces I posted are supposed to bolt to 🙂 ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [March 14, 2016, 6:38pm UTC](https://community.electricforum.com/t/splash-guards/5839/7 "2016-03-14T18:38:12Z")
They bolt on each side of the frame rail. the one with the round opening is the right side. Look closely at the outside of the frame rails for screw holes. (above and behind motor on right side.) ---
**Author:** ![IssaquahWA1979](https://avatars.discourse-cdn.com/v4/letter/i/91b2a8/32.png) [@IssaquahWA1979](https://community.electricforum.com/u/IssaquahWA1979)\ **Post date:** [March 15, 2016, 3:32pm UTC](https://community.electricforum.com/t/splash-guards/5839/8 "2016-03-15T15:32:44Z")
> [@OLD HOUSEBOATER;29529](#): > > They bolt on each side of the frame rail. the one with the round opening is the right side. Look closely at the outside of the frame rails for screw holes. (above and behind motor on right side.) I am starting to wonder if mine never had these because I cannot seem to locate any holes that would line up, in fact I cannot figure out an orientation that would line up with much of anything. I hate puzzles! Thanks as always for the help though I will continue to ponder how this is supposed to work