# Spicer trans on 2008 e4 **URL:** \ **Category:** NEV & LSV Forum\ **Created:** [March 16, 2018, 4:09pm UTC](https://community.electricforum.com/t/spicer-trans-on-2008-e4/13445 "2018-03-16T16:09:52Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Larry3](https://avatars.discourse-cdn.com/v4/letter/l/76d3ee/32.png) [@Larry3](https://community.electricforum.com/u/Larry3)\ **Post date:** [March 16, 2018, 4:09pm UTC](https://community.electricforum.com/t/spicer-trans-on-2008-e4/13445/1 "2018-03-16T16:09:52Z")
On YouTube Grant West suggests using 90 wt oil after a rebuild. He also suggest removing and adding oil via an inlet tube. I’ve looked mine over and can’t find the inlet. Does anyone know if and how I can add oil? Mine has a slow leak at the motor/transmission junction so I fear gear damage. Thanks Larry ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [March 17, 2018, 4:10am UTC](https://community.electricforum.com/t/spicer-trans-on-2008-e4/13445/2 "2018-03-17T04:10:17Z")
The sheet metal pan in the bottom of the transmission has a rubber plug in it. ---
**Author:** ![Larry3](https://avatars.discourse-cdn.com/v4/letter/l/76d3ee/32.png) [@Larry3](https://community.electricforum.com/u/Larry3)\ **Post date:** [March 19, 2018, 6:09pm UTC](https://community.electricforum.com/t/spicer-trans-on-2008-e4/13445/3 "2018-03-19T18:09:35Z")
Mine is a 2008. Does your sealed bearing work for this 5hp? ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [April 29, 2018, 8:50pm UTC](https://community.electricforum.com/t/spicer-trans-on-2008-e4/13445/4 "2018-04-29T20:50:13Z")
YES IT DOES. Rodney [rodneyadiehl@aol.com](mailto:rodneyadiehl@aol.com)