# Speedometer

**URL:** https://community.electricforum.com/t/speedometer/6355
**Category:** Ruff & Tuff
**Created:** [September 13, 2016, 3:41pm UTC](https://community.electricforum.com/t/speedometer/6355 "2016-09-13T15:41:03Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![slickrick\_t](https://avatars.discourse-cdn.com/v4/letter/s/8baadc/32.png) [@slickrick\_t](https://community.electricforum.com/u/slickrick_t)
#### Post date: [September 13, 2016, 3:41pm UTC](https://community.electricforum.com/t/speedometer/6355/1 "2016-09-13T15:41:03Z")

</div>

Ruff&tuff 2010 speedometer stop working the indicator hand inside stays at one side and dose not work when you turn on the key the indicator should go to one side then back it does not any infops I pulled out the speedometer checked wiring ok.

---

<div class="post-metadata">

### Author: ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)
#### Post date: [September 13, 2016, 4:29pm UTC](https://community.electricforum.com/t/speedometer/6355/2 "2016-09-13T16:29:28Z")

</div>

What else stopped working?

---

<div class="post-metadata">

### Author: ![slickrick\_t](https://avatars.discourse-cdn.com/v4/letter/s/8baadc/32.png) [@slickrick\_t](https://community.electricforum.com/u/slickrick_t)
#### Post date: [September 13, 2016, 7:19pm UTC](https://community.electricforum.com/t/speedometer/6355/3 "2016-09-13T19:19:14Z")

</div>

Nothing else I took the speedometer out looking at looks ok that’s it any information old houseboater

---

<div class="post-metadata">

### Author: ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [September 13, 2016, 7:28pm UTC](https://community.electricforum.com/t/speedometer/6355/4 "2016-09-13T19:28:41Z")

</div>

I know nothing.  
But, a gauge that swings and comes back, is a servo motor. Subject to failure and needing reset. Bang it around a little. Kill battery power for a minute.

---

<div class="post-metadata">

### Author: ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)
#### Post date: [September 13, 2016, 7:37pm UTC](https://community.electricforum.com/t/speedometer/6355/5 "2016-09-13T19:37:40Z")

</div>

David

Electrical Engineers DON’T DO THAT!!!

Rodney

---

<div class="post-metadata">

### Author: ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [September 13, 2016, 7:40pm UTC](https://community.electricforum.com/t/speedometer/6355/6 "2016-09-13T19:40:48Z")

</div>

They can’t reveal there methods before retirement.😉