# Speedometer no clock reading **URL:** \ **Category:** Uncategorized\ **Tags:** gem\ **Created:** [December 24, 2018, 4:08pm UTC](https://community.electricforum.com/t/speedometer-no-clock-reading/15137 "2018-12-24T16:08:28Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![bandit1](https://avatars.discourse-cdn.com/v4/letter/b/73ab20/32.png) [@bandit1](https://community.electricforum.com/u/bandit1)\ **Post date:** [December 24, 2018, 4:08pm UTC](https://community.electricforum.com/t/speedometer-no-clock-reading/15137/1 "2018-12-24T16:08:29Z")
Speedo didn’t work and replaced the sensor --now I have speed reading but no distance reading. the clock doesn’t change. Any ideas??? 2013 ES ---
**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\ **Post date:** [December 25, 2018, 11:57am UTC](https://community.electricforum.com/t/speedometer-no-clock-reading/15137/2 "2018-12-25T11:57:35Z")
Hi are you in e-meter mode ? TRIP METER/Odometer Switch/E-METER The trip switch has three functions: (1) toggling between the odometer and the trip meter; (2) reset the trip meter; (3) change the function of the speedometer and odometer from miles-per-hour (MPH) to kilometers-perhour (km/h) and miles to kilometers; (4) toggle between odometer/trip meter and e-meter, displaying accumulated power consumed from grid, show in kilowatt hours (KW/HR). Using the Trip/Odometer Switch/e-meter 1. Pressing the trip switch for less than 2 seconds will toggle between the odometer and trip meter modes on the display. 2. Pressing the trip switch for 3-9 seconds, while the display is in the trip mode, will reset the trip meter to zero. (TRIP must be lit on the display- see page 27). 3. Pressing the trip switch for 10-12 seconds, while the display is in the odometer mode will change the display functions from MPH to km/h and miles to kilometers