# Spark Lithium conversion

**URL:** <https://community.electricforum.com/t/spark-lithium-conversion/12638>\
**Category:** GEM Forum\
**Created:** [July 30, 2017, 3:44pm UTC](https://community.electricforum.com/t/spark-lithium-conversion/12638 "2017-07-30T15:44:50Z")\
**Posts on this page:** 6\
**Page:** 3

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [August 16, 2017, 7:38pm UTC](https://community.electricforum.com/t/spark-lithium-conversion/12638/41 "2017-08-16T19:38:59Z")

</div>

Keep an eye on balance. May have to turn it on and set lcd to stay on longer.  
Only balances when set to “on” and display is on.  
I don’t balance during charge and discharge. Seems a waste.  
Default balance is 10mv which is too tight for me. 20mv is plenty.

Set your fuel gauge in menu. I set from 3.5v to 4.1v.

If you plug in alarms, set levels where you want. I don’t bother.

Thought about sensing motor and controller temperature, but never got “a round tuit”.

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [August 17, 2017, 6:37am UTC](https://community.electricforum.com/t/spark-lithium-conversion/12638/42 "2017-08-17T06:37:09Z")

</div>

This Spark Kit is amazing. Up the steepest hill I still have room onnthe gas pedal to “power up” example my normal speed up the hill is around 20 MPH at best. I have lots of room onnthe gas pedal. Smash down and another 5mph it’s amazing super happy thank you David’ this thing rocks

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [August 17, 2017, 9:24am UTC](https://community.electricforum.com/t/spark-lithium-conversion/12638/43 "2017-08-17T09:24:41Z")

</div>

Thank you,  
Another hardware hack, if I can find it, is padding the throttle pot.  
Changes to a non linear pedal response. First 1/4 has reduced affect.

Watching for data.  
This is 1/2 pack. 19/2=9.5kwh=40 Spark miles🤓  
My test of 150w/mile give \>50 miles in theory.  
For longest life limit high and low volts. I only charge to 4 volts unless more range is needed. A button press on bms raises charge hvc.

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [August 17, 2017, 1:53pm UTC](https://community.electricforum.com/t/spark-lithium-conversion/12638/44 "2017-08-17T13:53:06Z")

</div>

My throttle feels fine not jerky or touchy feels normal to me no need to change anything. It zips up to 40mph in no time.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [August 27, 2017, 9:50pm UTC](https://community.electricforum.com/t/spark-lithium-conversion/12638/45 "2017-08-27T21:50:25Z")

</div>

And now for the bad part.  
Runs too fast. Need to slow it down.  
Seems to be a problem with battery monitor or cable to the display.  
T1 and T2 don’t like high voltage.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 14, 2017, 4:44pm UTC](https://community.electricforum.com/t/spark-lithium-conversion/12638/46 "2017-12-14T16:44:45Z")

</div>

Bumping this for Ryan.  
The Spark only needs 3 modules, but you get the idea.

[Previous page](https://community.electricforum.com/t/spark-lithium-conversion/12638.md?page=2)
