# Solenoid issue **URL:** \ **Category:** GEM Forum\ **Created:** [October 18, 2016, 3:02pm UTC](https://community.electricforum.com/t/solenoid-issue/6425 "2016-10-18T15:02:00Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Slackerme](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@Slackerme](https://community.electricforum.com/u/Slackerme)\ **Post date:** [October 18, 2016, 3:02pm UTC](https://community.electricforum.com/t/solenoid-issue/6425/1 "2016-10-18T15:02:00Z")
Hello have a solenoid problem. I bought a parked non running Car car two years ago. Fixed it all up and have about 1000 miles on it currently since redoing a bunch. Haven’t had a issues yet. So question is looks like I have an issue with the original solenoid. Not sure if it is repairable or if I should just buy a new one? Seems Rusty like the entire car was when I purchased it. Carr would show code 51 then sometimes 57 and also 66. Car would move an inch then show code. Where actually found this was when I went to move the car I Would floor the gas in it and it would actually go but start making the noise like in the video Just wondering if there’s a way to clean this or if I should just replace it thanks Dan ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [October 18, 2016, 5:40pm UTC](https://community.electricforum.com/t/solenoid-issue/6425/2 "2016-10-18T17:40:16Z")
Might suspect a controller problem