# Ruff & tuff golfcart rear axel

**URL:** https://community.electricforum.com/t/ruff-tuff-golfcart-rear-axel/18598
**Category:** Ruff & Tuff
**Created:** [April 24, 2020, 3:40am UTC](https://community.electricforum.com/t/ruff-tuff-golfcart-rear-axel/18598 "2020-04-24T03:40:54Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![AMIEWORKMAN](https://avatars.discourse-cdn.com/v4/letter/a/73ab20/32.png) [@AMIEWORKMAN](https://community.electricforum.com/u/AMIEWORKMAN)
#### Post date: [April 24, 2020, 3:40am UTC](https://community.electricforum.com/t/ruff-tuff-golfcart-rear-axel/18598/1 "2020-04-24T03:40:54Z")

</div>

Does anyone have ANY info on where I can get RUFF & TUFF rear axel!

---

<div class="post-metadata">

### Author: ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [April 24, 2020, 4:13am UTC](https://community.electricforum.com/t/ruff-tuff-golfcart-rear-axel/18598/2 "2020-04-24T04:13:43Z")

</div>

I can possibly part one out, that has a bad curtis sepex controller.  
It uses a 19 spline sepex motor, with a larger diameter face than standard.  
The parts would need to be pretty valuable to make parting out attractive, though.

---

<div class="post-metadata">

### Author: ![JohnL505](https://avatars.discourse-cdn.com/v4/letter/j/dbc845/32.png) [@JohnL505](https://community.electricforum.com/u/JohnL505)
#### Post date: [December 12, 2022, 10:52pm UTC](https://community.electricforum.com/t/ruff-tuff-golfcart-rear-axel/18598/3 "2022-12-12T22:52:13Z")

</div>

Good evening I’m new on this forum, I have a 2010 R&T 4x4 made n 2008 I’m looking for a rear end manual and possible a right rear axle and axle boot thanks John