# Ruff and Tuff controller

**URL:** <https://community.electricforum.com/t/ruff-and-tuff-controller/16717>\
**Category:** Ruff & Tuff\
**Created:** [July 28, 2019, 3:49pm UTC](https://community.electricforum.com/t/ruff-and-tuff-controller/16717 "2019-07-28T15:49:33Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hvac70](https://avatars.discourse-cdn.com/v4/letter/h/839c29/32.png) [@hvac70](https://community.electricforum.com/u/hvac70)\
**Post date:** [July 28, 2019, 3:49pm UTC](https://community.electricforum.com/t/ruff-and-tuff-controller/16717/1 "2019-07-28T15:49:33Z")

</div>

Has anyone replaced their controller on a Ruff and Tuff? I have a 2008 Hunter. I would think that other 48 volt controllers would work. Maybe custom from D&D or Alltrax.

---

<div class="post-metadata">

**Author:** ![Rose88](https://avatars.discourse-cdn.com/v4/letter/r/8dc957/32.png) [@Rose88](https://community.electricforum.com/u/Rose88)\
**Post date:** [April 17, 2025, 10:56am UTC](https://community.electricforum.com/t/ruff-and-tuff-controller/16717/2 "2025-04-17T10:56:23Z")

</div>

Same here as im doing a conversion with Alltrax SR48500. Problem is wiring on RT is different from EZGO. The throttle thats in it is a 3 wire, not sure why? Needs 5v coming into it and 5v going out, have had a hard time finding info.

 ![9a97f192-88f1-42d0-87a0-41748803090a](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/1/7/170ab8d57ea95fa6f96b3f8454d67c87c80b832a.jpeg)  
 ![1b50007c-14db-4a91-8924-ac1d1f148e64](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/a/3/a3fa2315476c9a09941c4c01003f35e52510c47b.jpeg)  
 ![6e3076f5-a0ee-4cd7-8382-1bd4d515174a](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/9/9/992f09aa8711b4065f86076558c5a6374d523ae9.jpeg)  
 ![93195d5a-1511-46b8-9a63-ebf4096c0e02](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/e/1/e1adf7806a4bd1949df8881a712e8ba5eaa8a8fb.jpeg)