# Reverse Beeper Disconnect

**URL:** https://community.electricforum.com/t/reverse-beeper-disconnect/18142
**Category:** GEM Forum
**Created:** [February 23, 2020, 3:13am UTC](https://community.electricforum.com/t/reverse-beeper-disconnect/18142 "2020-02-23T03:13:36Z")
**Posts on this page:** 7
**Page:** 1

<div class="post-metadata">

### Author: ![MH808](https://avatars.discourse-cdn.com/v4/letter/m/7ba0ec/32.png) [@MH808](https://community.electricforum.com/u/MH808)
#### Post date: [February 23, 2020, 3:13am UTC](https://community.electricforum.com/t/reverse-beeper-disconnect/18142/1 "2020-02-23T03:13:36Z")

</div>

Well, I found the 45 second delay beeper on the firewall by the steering column on my 2007 ELXD. I cannot find the reverse beeper. Any help on its location or how to disconnect it would be greatly appreciated. I have the dash apart and tried listening for the location but it sounds buried.

---

<div class="post-metadata">

### Author: ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)
#### Post date: [February 23, 2020, 12:57pm UTC](https://community.electricforum.com/t/reverse-beeper-disconnect/18142/2 "2020-02-23T12:57:45Z")

</div>

cut the DB/LG darkblue light green cable on controller  
its on pin 10,“reverse buzzer driver”

---

<div class="post-metadata">

### Author: ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)
#### Post date: [February 23, 2020, 5:44pm UTC](https://community.electricforum.com/t/reverse-beeper-disconnect/18142/3 "2020-02-23T17:44:03Z")

</div>

This is a safety feature

---

<div class="post-metadata">

### Author: ![MH808](https://avatars.discourse-cdn.com/v4/letter/m/7ba0ec/32.png) [@MH808](https://community.electricforum.com/u/MH808)
#### Post date: [February 23, 2020, 10:30pm UTC](https://community.electricforum.com/t/reverse-beeper-disconnect/18142/4 "2020-02-23T22:30:21Z")

</div>

Thank you for your responses. You are both correct.

---

<div class="post-metadata">

### Author: ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)
#### Post date: [February 24, 2020, 12:25am UTC](https://community.electricforum.com/t/reverse-beeper-disconnect/18142/5 "2020-02-24T00:25:58Z")

</div>

There is only 1 beeper

---

<div class="post-metadata">

### Author: ![RS\_E6](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/rs_e6/32/12308_2.png) [@RS\_E6](https://community.electricforum.com/u/RS_E6)
#### Post date: [February 24, 2020, 4:29pm UTC](https://community.electricforum.com/t/reverse-beeper-disconnect/18142/6 "2020-02-24T16:29:04Z")

</div>

On my 2013 E6S the reverse beeper is on the PSDM circuit board. I opened mine up and covered the beeper with some tape to reduce the volume. It still serves its purpose without making everyone cringe. I think I shared photos of this in another post before but can’t recall.

---

<div class="post-metadata">

### Author: ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)
#### Post date: [February 24, 2020, 5:06pm UTC](https://community.electricforum.com/t/reverse-beeper-disconnect/18142/7 "2020-02-24T17:06:08Z")

</div>

yes but easy to cut cable on pin 10 and also put a on off switch if you want