# Replacing Charger

**URL:** <https://community.electricforum.com/t/replacing-charger/19871>\
**Category:** GEM Forum\
**Created:** [September 19, 2020, 4:02am UTC](https://community.electricforum.com/t/replacing-charger/19871 "2020-09-19T04:02:56Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![TerryJ](https://avatars.discourse-cdn.com/v4/letter/t/b3f665/32.png) [@TerryJ](https://community.electricforum.com/u/TerryJ)\
**Post date:** [September 19, 2020, 4:02am UTC](https://community.electricforum.com/t/replacing-charger/19871/1 "2020-09-19T04:02:56Z")

</div>

I am new to GEM cars and have a 2001 E825 with a bad original SPS Electronics charger. I purchased a DeltaQ charger and unsure of how to wire new charger up. Connectors are not the same and i wouldn’t know where to start to hook new charger up. I would appreciate any help.

---

<div class="post-metadata">

**Author:** ![Reddevil](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/reddevil/32/6128_2.png) [@Reddevil](https://community.electricforum.com/u/Reddevil)\
**Post date:** [September 19, 2020, 8:01pm UTC](https://community.electricforum.com/t/replacing-charger/19871/2 "2020-09-19T20:01:45Z")

</div>

Search this forum, this has been answered a number of times.

---

<div class="post-metadata">

**Author:** ![ca6772738758](https://avatars.discourse-cdn.com/v4/letter/c/da6949/32.png) [@ca6772738758](https://community.electricforum.com/u/ca6772738758)\
**Post date:** [September 20, 2020, 10:17am UTC](https://community.electricforum.com/t/replacing-charger/19871/3 "2020-09-20T10:17:27Z")

</div>

Can you return it go to quick charge much better unit and simpler and easy to program hook up just as easy Myself I would never buy a DQ again and I believe many out there will tell you the same

---

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [September 20, 2020, 2:31pm UTC](https://community.electricforum.com/t/replacing-charger/19871/4 "2020-09-20T14:31:15Z")

</div>

To each their own - use nothing but DQ and they have do an awesome job - once you have the correct profile or a programer they are very versatile and pretty bulletproof.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 20, 2020, 6:26pm UTC](https://community.electricforum.com/t/replacing-charger/19871/5 "2020-09-20T18:26:03Z")

</div>

DQ is best as shown by the number of oem users.

The main wires from the DQ green plug go here.

B- and B+ are all you need to charge battery.

Some algorithms need a temperature sensor to work. Connect from pin 1 to pin 2 on DQ 8p connector. If you don’t have one use a 10k resistor to spoof it.

The main wires from the DQ green plug go here.

B- and B+ are all you need to charge battery.

Some algorithms need a temperature sensor to work. Connect from pin 1 to pin 2 on DQ 8p connector. If you don’t have one use a 10k resistor to spoof it.

![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/0/038d2da6d5a29017e4841f5603bf9c241d002b42.jpeg)

![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/f/f39ce5be6ae316119c534375278ade50f9b103fd.jpeg)

 ![dq dci diagram1](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/4/4f1c60dfbff06f9d91da7d7f5eef20d1d3049a33.gif)

---

<div class="post-metadata">

**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\
**Post date:** [September 21, 2020, 12:30am UTC](https://community.electricforum.com/t/replacing-charger/19871/6 "2020-09-21T00:30:52Z")

</div>

DeltaQ is a very advanced charger . It does things others can’t . take the time to get it to work in your early Gem . Follow what INWO says and you should be good to go .

---

<div class="post-metadata">

**Author:** ![TerryJ](https://avatars.discourse-cdn.com/v4/letter/t/b3f665/32.png) [@TerryJ](https://community.electricforum.com/u/TerryJ)\
**Post date:** [September 22, 2020, 8:13pm UTC](https://community.electricforum.com/t/replacing-charger/19871/7 "2020-09-22T20:13:35Z")

</div>

Thanks for all the help with wiring the charger i will try and get it working this weekend.
