# Question

**URL:** <https://community.electricforum.com/t/question/4567>\
**Category:** Introduce yourself\
**Created:** [October 23, 2014, 7:02pm UTC](https://community.electricforum.com/t/question/4567 "2014-10-23T19:02:44Z")\
**Posts on this page:** 15\
**Page:** 1

<div class="post-metadata">

**Author:** ![ppetty407](https://avatars.discourse-cdn.com/v4/letter/p/fbc32d/32.png) [@ppetty407](https://community.electricforum.com/u/ppetty407)\
**Post date:** [October 23, 2014, 7:02pm UTC](https://community.electricforum.com/t/question/4567/1 "2014-10-23T19:02:44Z")

</div>

I just purchased a 2007 Gem. It has all new batteries but I can only get to top speed of 16 mph. When I come to a stop it says code 77… After i turn the car on and off it will go again. Someone asked on the forum if it could be in turf mode? I don’t know. What does that mean? Any ideas? Thanks

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [October 24, 2014, 5:41am UTC](https://community.electricforum.com/t/question/4567/2 "2014-10-24T05:41:48Z")

</div>

The switch next to the fwd/rev switch turns the “turf” mode on and off. The turf mode is used on the golf course and doesnt tear up the grass.

---

<div class="post-metadata">

**Author:** ![E-Frogs](https://avatars.discourse-cdn.com/v4/letter/e/f19dbf/32.png) [@E-Frogs](https://community.electricforum.com/u/E-Frogs)\
**Post date:** [October 24, 2014, 6:45am UTC](https://community.electricforum.com/t/question/4567/3 "2014-10-24T06:45:54Z")

</div>

code 77 is a capacitor voltage too high, the controller needs to be looked at. What is your battery pack voltage? Do you have 6 batteries or 9?

---

<div class="post-metadata">

**Author:** ![RC\_Bob](https://avatars.discourse-cdn.com/v4/letter/r/8e7dd6/32.png) [@RC\_Bob](https://community.electricforum.com/u/RC_Bob)\
**Post date:** [October 31, 2014, 9:23pm UTC](https://community.electricforum.com/t/question/4567/4 "2014-10-31T21:23:17Z")

</div>

I have a RV park in McCloud CA. A GEM 2002 is my vehicle around the park. My interest is keeping my EV running. The batteries are Napa and four years old . I think they are ready to be replaced as one is low in voltage after running for a while.

RC Bob

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [November 1, 2014, 8:57am UTC](https://community.electricforum.com/t/question/4567/5 "2014-11-01T08:57:25Z")

</div>

4 years is not bad life for a set of NAPA batteries. You might purchase a used battery to replace the bad one. However the others arent far behind.

---

<div class="post-metadata">

**Author:** ![RC\_Bob](https://avatars.discourse-cdn.com/v4/letter/r/8e7dd6/32.png) [@RC\_Bob](https://community.electricforum.com/u/RC_Bob)\
**Post date:** [November 1, 2014, 12:33pm UTC](https://community.electricforum.com/t/question/4567/6 "2014-11-01T12:33:37Z")

</div>

Thanks  
I put in an Marine battery and it helps some so will replace all next spring as the winter is shut down time. I have to decide between Trojan or Napa. I’ll have to go 130 miles for the Trojan. What is your opinion.

RC Bob

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [November 1, 2014, 2:43pm UTC](https://community.electricforum.com/t/question/4567/7 "2014-11-01T14:43:02Z")

</div>

If your going to keep the cart go with the Trojan 1275’s. If your going to sell the cart go with the Trpjan 1275’s. They last a long time and they help sell a used cart.

---

<div class="post-metadata">

**Author:** ![RC\_Bob](https://avatars.discourse-cdn.com/v4/letter/r/8e7dd6/32.png) [@RC\_Bob](https://community.electricforum.com/u/RC_Bob)\
**Post date:** [November 1, 2014, 4:21pm UTC](https://community.electricforum.com/t/question/4567/8 "2014-11-01T16:21:23Z")

</div>

Thanks Old Houseboater  
I’ll get the Trojans

---

<div class="post-metadata">

**Author:** ![ppetty407](https://avatars.discourse-cdn.com/v4/letter/p/fbc32d/32.png) [@ppetty407](https://community.electricforum.com/u/ppetty407)\
**Post date:** [November 2, 2014, 7:11am UTC](https://community.electricforum.com/t/question/4567/9 "2014-11-02T07:11:00Z")

</div>

> [@OLD HOUSEBOATER;22538](#):
>
> The switch next to the fwd/rev switch turns the “turf” mode on and off. The turf mode is used on the golf course and doesnt tear up the grass.

The only switch I have next to forward and reverse is the trip mode. Any other ideas where it might be?

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [November 2, 2014, 7:18am UTC](https://community.electricforum.com/t/question/4567/10 "2014-11-02T07:18:23Z")

</div>

Trip mode is the switch. Try it in both positions. 1st position gives about 17/19 MPH and second 25/27.

---

<div class="post-metadata">

**Author:** ![ppetty407](https://avatars.discourse-cdn.com/v4/letter/p/fbc32d/32.png) [@ppetty407](https://community.electricforum.com/u/ppetty407)\
**Post date:** [November 2, 2014, 7:34am UTC](https://community.electricforum.com/t/question/4567/11 "2014-11-02T07:34:19Z")

</div>

My trip mode will not click to higher position. You can hold it there and it just clears the mileage. Thanks for trying to help. Any other suggestions?

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [November 2, 2014, 8:31am UTC](https://community.electricforum.com/t/question/4567/12 "2014-11-02T08:31:57Z")

</div>

The switch is just an on/off 2 position switch. It should stay in position. What year is your cart. The schematic I have is for a 1999 model.

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [November 2, 2014, 8:31am UTC](https://community.electricforum.com/t/question/4567/13 "2014-11-02T08:31:57Z")

</div>

The switch is just an on/off 2 position switch. It should stay in position. What year is your cart. The schematic I have is for a 1999 model.

---

<div class="post-metadata">

**Author:** ![ppetty407](https://avatars.discourse-cdn.com/v4/letter/p/fbc32d/32.png) [@ppetty407](https://community.electricforum.com/u/ppetty407)\
**Post date:** [November 2, 2014, 10:06am UTC](https://community.electricforum.com/t/question/4567/14 "2014-11-02T10:06:01Z")

</div>

Mine is a 2002. I am going to have a tech come out and look at it. Thanks for your help

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [November 2, 2014, 10:10am UTC](https://community.electricforum.com/t/question/4567/15 "2014-11-02T10:10:00Z")

</div>

Let us know the result.
