# Planning a build to do

**URL:** <https://community.electricforum.com/t/planning-a-build-to-do/18573>\
**Category:** Conversion Kits\
**Created:** [April 20, 2020, 4:10am UTC](https://community.electricforum.com/t/planning-a-build-to-do/18573 "2020-04-20T04:10:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![XXJJ11](https://avatars.discourse-cdn.com/v4/letter/x/bb73d2/32.png) [@XXJJ11](https://community.electricforum.com/u/XXJJ11)\
**Post date:** [April 20, 2020, 4:10am UTC](https://community.electricforum.com/t/planning-a-build-to-do/18573/1 "2020-04-20T04:10:32Z")

</div>

I’m new here, but I have a project in mind and I hope someone can help me because I’m trying to wrap my head around everything and figure out what I need for this project. I’m trying to see what kind of batteries could power a twin/ dual motor setup. I was thinking about getting a kit that develops a large amount of torque

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [April 20, 2020, 4:12am UTC](https://community.electricforum.com/t/planning-a-build-to-do/18573/2 "2020-04-20T04:12:48Z")

</div>

What vehicle?  
Two motors in sync can get tricky.  
Battery is the least of your problem.

---

<div class="post-metadata">

**Author:** ![XXJJ11](https://avatars.discourse-cdn.com/v4/letter/x/bb73d2/32.png) [@XXJJ11](https://community.electricforum.com/u/XXJJ11)\
**Post date:** [April 20, 2020, 2:14pm UTC](https://community.electricforum.com/t/planning-a-build-to-do/18573/3 "2020-04-20T14:14:37Z")

</div>

I was planning to use a 2007 Hyundai Tiburon, and putting them into a welded cradle to hold them in the front and rear end