# Passenger side blinker ,brake light **URL:** \ **Category:** GEM Forum\ **Created:** [May 10, 2020, 11:49am UTC](https://community.electricforum.com/t/passenger-side-blinker-brake-light/18721 "2020-05-10T11:49:06Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![joebro](https://avatars.discourse-cdn.com/v4/letter/j/d26b3c/32.png) [@joebro](https://community.electricforum.com/u/joebro)\ **Post date:** [May 10, 2020, 11:49am UTC](https://community.electricforum.com/t/passenger-side-blinker-brake-light/18721/1 "2020-05-10T11:49:07Z")
Passenger side blinker front and rear and ,brake light not working, only on passenger side. Headlight works. Turn indicator solid red Any ideas Thanks Joe ---
**Author:** ![IRBGEM](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/irbgem/32/4550_2.png) [@IRBGEM](https://community.electricforum.com/u/IRBGEM)\ **Post date:** [May 10, 2020, 4:49pm UTC](https://community.electricforum.com/t/passenger-side-blinker-brake-light/18721/2 "2020-05-10T16:49:49Z")
Joe, I just went through this. Check the ground coming out of the four pin connector under the hood. My four pin connector was melted. I replaced it and everything worked again. ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [May 10, 2020, 4:50pm UTC](https://community.electricforum.com/t/passenger-side-blinker-brake-light/18721/3 "2020-05-10T16:50:43Z")
2005 up Trouble in PDC Common problem. ---
**Author:** ![joebro](https://avatars.discourse-cdn.com/v4/letter/j/d26b3c/32.png) [@joebro](https://community.electricforum.com/u/joebro)\ **Post date:** [May 10, 2020, 5:34pm UTC](https://community.electricforum.com/t/passenger-side-blinker-brake-light/18721/4 "2020-05-10T17:34:44Z")
Mine is a 2002 Thanks I’ll look Would that happen a just 1 side of the gem? ---
**Author:** ![joebro](https://avatars.discourse-cdn.com/v4/letter/j/d26b3c/32.png) [@joebro](https://community.electricforum.com/u/joebro)\ **Post date:** [May 10, 2020, 5:36pm UTC](https://community.electricforum.com/t/passenger-side-blinker-brake-light/18721/5 "2020-05-10T17:36:41Z")
Thank you would that affect only 1 side ,the passenger side ---
**Author:** ![IRBGEM](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/irbgem/32/4550_2.png) [@IRBGEM](https://community.electricforum.com/u/IRBGEM)\ **Post date:** [May 10, 2020, 5:43pm UTC](https://community.electricforum.com/t/passenger-side-blinker-brake-light/18721/6 "2020-05-10T17:43:54Z")
Yes. The harness for the blinkers, horn and lights all run through that connection/ground. It screwed up all off the lighting on my car, front and back. Once there’s a bad connection/short the entire system gets wonky. ---
**Author:** ![fabteichmann](https://avatars.discourse-cdn.com/v4/letter/f/e79b87/32.png) [@fabteichmann](https://community.electricforum.com/u/fabteichmann)\ **Post date:** [May 10, 2020, 8:46pm UTC](https://community.electricforum.com/t/passenger-side-blinker-brake-light/18721/7 "2020-05-10T20:46:05Z")
Hi Rodney, I hope you are well, I recently saw your profile, and I have interest in buy from you the frame adapter to make my GEM E825 2002 to 4 seats, I already have an EZGO flip seat, brand new. Thank you ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [May 11, 2020, 12:15am UTC](https://community.electricforum.com/t/passenger-side-blinker-brake-light/18721/8 "2020-05-11T00:15:39Z")
Sorry I dont do those anymore. In a message dated 5/10/2020 4:56:11 PM Eastern Standard Time, [electricforum@discoursemail.com](mailto:electricforum@discoursemail.com) writes: