# Overhead radio console

**URL:** <https://community.electricforum.com/t/overhead-radio-console/3386>\
**Category:** GEM Forum\
**Created:** [May 3, 2013, 1:22pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386 "2013-05-03T13:22:36Z")\
**Posts on this page:** 14\
**Page:** 2

<div class="post-metadata">

**Author:** ![Chili\_Willy](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chili_willy/32/5180_2.png) [@Chili\_Willy](https://community.electricforum.com/u/Chili_Willy)\
**Post date:** [October 21, 2013, 6:57pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/21 "2013-10-21T18:57:05Z")

</div>

where did u get the overhead unit?

---

<div class="post-metadata">

**Author:** ![eSGEMColo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/esgemcolo/32/714_2.png) [@eSGEMColo](https://community.electricforum.com/u/eSGEMColo)\
**Post date:** [October 21, 2013, 7:09pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/22 "2013-10-21T19:09:11Z")

</div>

I got mine from Lee at GEM car parts direct/ Beck Chrysler… 888-677-4961

[GEM Car Stereo Console](http://www.gemelectricmotorcars.com/pages/CustomCatalog/Product/1335771)

Bob

---

<div class="post-metadata">

**Author:** ![nosgsxr](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/nosgsxr/32/538_2.png) [@nosgsxr](https://community.electricforum.com/u/nosgsxr)\
**Post date:** [October 24, 2013, 12:23pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/23 "2013-10-24T12:23:09Z")

</div>

I got mine from ebay …I posted the dudes name on here somewhere …he bought out a ton of gem stuff when polaris bought them out …he has great prices …most everything is about 1/2 price from factory if he has it

---

<div class="post-metadata">

**Author:** ![eSGEMColo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/esgemcolo/32/714_2.png) [@eSGEMColo](https://community.electricforum.com/u/eSGEMColo)\
**Post date:** [October 24, 2013, 12:31pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/24 "2013-10-24T12:31:45Z")

</div>

the person on eBay is Lynn…

[gemcarparts@yahoo.com](mailto:gemcarparts@yahoo.com)

Bob

---

<div class="post-metadata">

**Author:** ![nosgsxr](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/nosgsxr/32/538_2.png) [@nosgsxr](https://community.electricforum.com/u/nosgsxr)\
**Post date:** [October 31, 2013, 6:22pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/25 "2013-10-31T18:22:20Z")

</div>

[quote=eS GEM Colo;17309]the person on eBay is Lynn…

[gemcarparts@yahoo.com](mailto:gemcarparts@yahoo.com)

Bob[/quote]

Th8s is not the person I got mine from…I think I only gave 90 plus shipping. He sales things for about 1/2 price off new and all the stuff is new in the box. Look in the “stickey” section

---

<div class="post-metadata">

**Author:** ![cacurran](https://avatars.discourse-cdn.com/v4/letter/c/7feea3/32.png) [@cacurran](https://community.electricforum.com/u/cacurran)\
**Post date:** [January 3, 2014, 4:55am UTC](https://community.electricforum.com/t/overhead-radio-console/3386/26 "2014-01-03T04:55:14Z")

</div>

Hey it looks great im doing the same thing on my 09 but not sure what or where the power source comes from… I do have a breaker for the radio but its not really accessable …

---

<div class="post-metadata">

**Author:** ![eSGEMColo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/esgemcolo/32/714_2.png) [@eSGEMColo](https://community.electricforum.com/u/eSGEMColo)\
**Post date:** [January 3, 2014, 9:24am UTC](https://community.electricforum.com/t/overhead-radio-console/3386/27 "2014-01-03T09:24:51Z")

</div>

I went to the power source and pulled a wire to the front of the car… I mounted a fuse block using a bolt that holds the window washing fluid… now I have easy access up to another 4 fusses… should I need them… I did this when I finally added power to my heated seats…

Bob

---

<div class="post-metadata">

**Author:** ![cacurran](https://avatars.discourse-cdn.com/v4/letter/c/7feea3/32.png) [@cacurran](https://community.electricforum.com/u/cacurran)\
**Post date:** [February 24, 2014, 7:52pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/28 "2014-02-24T19:52:35Z")

</div>

Painted mine with krayon plastic paint after sanding with 150 grit…attach with 6 pieces of two sided tape 2 inch long each. Then get some two part plastic epoxy dab it on thick in 6 areas and then put a strap arround the top of the rig and tighten snug fore a few days…

---

<div class="post-metadata">

**Author:** ![cacurran](https://avatars.discourse-cdn.com/v4/letter/c/7feea3/32.png) [@cacurran](https://community.electricforum.com/u/cacurran)\
**Post date:** [February 24, 2014, 8:04pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/29 "2014-02-24T20:04:23Z")

</div>

Put the 6x9s vertacal under the middle of the rear seats …use a dremel to cut the plastic after measuring and marking off the templet

---

<div class="post-metadata">

**Author:** ![IssaquahWA1979](https://avatars.discourse-cdn.com/v4/letter/i/91b2a8/32.png) [@IssaquahWA1979](https://community.electricforum.com/u/IssaquahWA1979)\
**Post date:** [January 26, 2016, 11:39pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/30 "2016-01-26T23:39:40Z")

</div>

Did you ever get or does anyone have any pictures of the consoles installed showing the bolts in the roof etc? I am trying to figure out the speakers as the 6.5s I have are about 3/4" too deep and the spacer rings look odd when I dry fitted everything. Has anyone found a good spo for a sub on an E2?

---

<div class="post-metadata">

**Author:** ![IssaquahWA1979](https://avatars.discourse-cdn.com/v4/letter/i/91b2a8/32.png) [@IssaquahWA1979](https://community.electricforum.com/u/IssaquahWA1979)\
**Post date:** [January 29, 2016, 1:34pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/31 "2016-01-29T13:34:31Z")

</div>

just in case anyone is using the search and wants to see another radio installation here is mine before going into the GEM, I will upload the finished project when I get everything drilled out.

---

<div class="post-metadata">

**Author:** ![eSGEMColo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/esgemcolo/32/714_2.png) [@eSGEMColo](https://community.electricforum.com/u/eSGEMColo)\
**Post date:** [January 29, 2016, 2:12pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/32 "2016-01-29T14:12:34Z")

</div>

I’m dying to see how to mount it… I tried tape… no radio or speakers and that didn’t work… I’m a klutz and really don’t want the screws to go out the top of the car… guess if I messed up I could always add a light bar

Bob

---

<div class="post-metadata">

**Author:** ![cutom825](https://avatars.discourse-cdn.com/v4/letter/c/ce73a5/32.png) [@cutom825](https://community.electricforum.com/u/cutom825)\
**Post date:** [February 3, 2016, 7:43pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/33 "2016-02-03T19:43:10Z")

</div>

Hey guys, did anyone create a DIY for the 9v batt? I read all the calculations just wondering if anyone has a direct link to what is needed.

Also I noticed that someone mentioned “pulling power from the source” where is this source? Would I be able to use it for other things including heated seats?

---

<div class="post-metadata">

**Author:** ![eSGEMColo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/esgemcolo/32/714_2.png) [@eSGEMColo](https://community.electricforum.com/u/eSGEMColo)\
**Post date:** [February 3, 2016, 11:58pm UTC](https://community.electricforum.com/t/overhead-radio-console/3386/34 "2016-02-03T23:58:36Z")

</div>

[quote=cutom825;29008]Hey guys, did anyone create a DIY for the 9v batt? I read all the calculations just wondering if anyone has a direct link to what is needed.

Also I noticed that someone mentioned “pulling power from the source” where is this source? Would I be able to use it for other things including heated seats?[/quote]

Cutom… I took a wore from the main fuse panel to a fuse block that I mounted to a flange holding my windshield washer fluid… I have 8 more fuse locations… I do have heated seats and pulled the wire to a fuse there… not sure what else I have on the block but it’s a lot easier to get to than the one on the lower dash… I have an 05 eS truckette

I’ve seen chat about the 9v battery… not sure if it was here on in the NEV group on yahoo

Bob

[Previous page](https://community.electricforum.com/t/overhead-radio-console/3386.md?page=1)
