# Open up a 2002 E825 Dash without breaking it

**URL:** https://community.electricforum.com/t/open-up-a-2002-e825-dash-without-breaking-it/6113
**Category:** GEM Forum
**Created:** [June 5, 2016, 5:37pm UTC](https://community.electricforum.com/t/open-up-a-2002-e825-dash-without-breaking-it/6113 "2016-06-05T17:37:48Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![dbenson2](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@dbenson2](https://community.electricforum.com/u/dbenson2)
#### Post date: [June 5, 2016, 5:37pm UTC](https://community.electricforum.com/t/open-up-a-2002-e825-dash-without-breaking-it/6113/1 "2016-06-05T17:37:48Z")

</div>

How do I open up the dashto access the controller without breaking the plastic?

---

<div class="post-metadata">

### Author: ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)
#### Post date: [June 5, 2016, 6:03pm UTC](https://community.electricforum.com/t/open-up-a-2002-e825-dash-without-breaking-it/6113/2 "2016-06-05T18:03:01Z")

</div>

Open the hood and take out the 2 screws holding it in place. Velcro completes the retaining between the top and bottom pieces.

---

<div class="post-metadata">

### Author: ![dbenson2](https://avatars.discourse-cdn.com/v4/letter/d/258eb7/32.png) [@dbenson2](https://community.electricforum.com/u/dbenson2)
#### Post date: [June 5, 2016, 8:35pm UTC](https://community.electricforum.com/t/open-up-a-2002-e825-dash-without-breaking-it/6113/3 "2016-06-05T20:35:38Z")

</div>

Thank You. I was not sure if the wiper motor went through it also.