# Open Source controller

**URL:** <https://community.electricforum.com/t/open-source-controller/16787>\
**Category:** GEM Forum\
**Created:** [August 5, 2019, 9:05pm UTC](https://community.electricforum.com/t/open-source-controller/16787 "2019-08-05T21:05:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![diymatt](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/diymatt/32/1822_2.png) [@diymatt](https://community.electricforum.com/u/diymatt)\
**Post date:** [August 5, 2019, 9:05pm UTC](https://community.electricforum.com/t/open-source-controller/16787/1 "2019-08-05T21:05:20Z")

</div>

This is probably the wrong forum to post this in but I wanted to be sure @Inwo saw it and all the other people anxiously eyeballing the AC motor project.

This fella/team has open-sourced their ac controller.  
[https://endless-sphere.com/forums/viewtopic.php?f=30&t=89056&start=250#p1458465](https://endless-sphere.com/forums/viewtopic.php?f=30&t=89056&start=250#p1458465)

I know Dave is doing a lot of the reverse engineering to make old stock work but wanted to toss this out there in case it helped the cause.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [August 5, 2019, 10:29pm UTC](https://community.electricforum.com/t/open-source-controller/16787/2 "2019-08-05T22:29:07Z")

</div>

I bet the control board would drive the Kinetek power section. Most of the work would be done. Case, heat transfer, etc.  
Someone would need the time. ☹