# Noise in gem car drive train

**URL:** <https://community.electricforum.com/t/noise-in-gem-car-drive-train/19963>\
**Category:** GEM Forum\
**Created:** [October 1, 2020, 6:59pm UTC](https://community.electricforum.com/t/noise-in-gem-car-drive-train/19963 "2020-10-01T18:59:59Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dash](https://avatars.discourse-cdn.com/v4/letter/d/7c8e57/32.png) [@Dash](https://community.electricforum.com/u/Dash)\
**Post date:** [October 1, 2020, 6:59pm UTC](https://community.electricforum.com/t/noise-in-gem-car-drive-train/19963/1 "2020-10-01T18:59:59Z")

</div>

2002 Gem car, when I take my foot off of the accelerator pedal there is like a rattle sound. Maybe like a gear rattle.can someone tell me what may cause that

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [October 1, 2020, 9:32pm UTC](https://community.electricforum.com/t/noise-in-gem-car-drive-train/19963/2 "2020-10-01T21:32:53Z")

</div>

That is caused by a worn Input shaft. Lots of info on this site. But in short when the motor and input shaft (on the transmission) are under load things are quiet. When you let off and the gears are not under load you hear/feel a loud clanking/vibration.

Replace the input shaft with a upgraded one and bearing and oil seal and you will be good to go. Rodney (Old Housboater) here sells kits

---

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [October 9, 2020, 5:46pm UTC](https://community.electricforum.com/t/noise-in-gem-car-drive-train/19963/3 "2020-10-09T17:46:42Z")

</div>

could also be the rubber bumper which goes into the splined hole on the bottom. Does it also go clunk sometimes when you start moving?

---

<div class="post-metadata">

**Author:** ![Dash](https://avatars.discourse-cdn.com/v4/letter/d/7c8e57/32.png) [@Dash](https://community.electricforum.com/u/Dash)\
**Post date:** [October 9, 2020, 7:41pm UTC](https://community.electricforum.com/t/noise-in-gem-car-drive-train/19963/4 "2020-10-09T19:41:52Z")

</div>

No clunking just a rattle when letting off the accelerator pedal.  
Just order houseboats kit
