# No 12v bad inverter?

**URL:** <https://community.electricforum.com/t/no-12v-bad-inverter/13582>\
**Category:** GEM Forum\
**Created:** [April 18, 2018, 1:17am UTC](https://community.electricforum.com/t/no-12v-bad-inverter/13582 "2018-04-18T01:17:21Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Slackerme](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@Slackerme](https://community.electricforum.com/u/Slackerme)\
**Post date:** [April 18, 2018, 1:17am UTC](https://community.electricforum.com/t/no-12v-bad-inverter/13582/1 "2018-04-18T01:17:22Z")

</div>

Hello  
So I was taking my dash apart and I have a 12 volt switch for under glow lights. Anyways I must have grounded out the positive from the extra 12 volt feed and I heard a pop  
Checked all fused couldn’t find anything blown  
All of the 12 volt is out  
Lights  
Horn  
Turn signals  
Wiper  
I have the recalled inverter installed so there are no fuses on it

I know it’s not a blow inverter because I took one off another good gem I have in the garage which everything works and it still doesn’t work?

Any ideas. Thanks

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [April 19, 2018, 4:56pm UTC](https://community.electricforum.com/t/no-12v-bad-inverter/13582/2 "2018-04-19T16:56:22Z")

</div>

Google

$185 new

Rodney

---

<div class="post-metadata">

**Author:** ![Herrydas](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/herrydas/32/872_2.png) [@Herrydas](https://community.electricforum.com/u/Herrydas)\
**Post date:** [April 28, 2018, 5:34am UTC](https://community.electricforum.com/t/no-12v-bad-inverter/13582/3 "2018-04-28T05:34:45Z")

</div>

Try new inverter for charging.  
cost is around $170  
Brand new

---

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [September 10, 2018, 8:41pm UTC](https://community.electricforum.com/t/no-12v-bad-inverter/13582/4 "2018-09-10T20:41:14Z")

</div>

@Slackerme  
Did you ever get a response to this? You said you did not think it was the inverter as you tried a second one. We just lost all 12V as well and all the fuses look good.

Thanks

---

<div class="post-metadata">

**Author:** ![Slackerme](https://avatars.discourse-cdn.com/v4/letter/s/ac8455/32.png) [@Slackerme](https://community.electricforum.com/u/Slackerme)\
**Post date:** [September 11, 2018, 10:16am UTC](https://community.electricforum.com/t/no-12v-bad-inverter/13582/5 "2018-09-11T10:16:50Z")

</div>

I did not get a response  
After poking around forever it seemed it Ended up being a insulated connector spade under the dash wasn’t making a good contact.

What happen was whoever installed my newer inverter jammed the connector together

The male side was bent down and wasn’t even inside of the female. Suppose it worked as long as it did

Start unplugging stuff under the dash and just making sure it has good connections
