# Newer Tomberlin chassis and parts
**URL:** https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034
**Category:** Buy, Sell, & Trade
**Created:** [August 30, 2022, 6:03pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034 "2022-08-30T18:03:28Z")
**Posts on this page:** 16
**Page:** 1
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [August 30, 2022, 6:03pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/1 "2022-08-30T18:03:28Z")
Rolling chassis parts.
Wheels, steering, brakes, coil over, 19spline dif, tubs, andbattery trays.
$750
From R&D, possibly new models.
One ac motor and Sevcon controller add $1k
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [August 30, 2022, 6:53pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/2 "2022-08-30T18:53:05Z")
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [August 30, 2022, 6:53pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/3 "2022-08-30T18:53:51Z")
---
### Author:  [@JarJarJava](https://community.electricforum.com/u/JarJarJava)
#### Post date: [August 30, 2022, 6:56pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/4 "2022-08-30T18:56:20Z")
I guess that first one addresses the “how hell do I see were im going” while drifting question quite well.
---
### Author:  [@MikeKC](https://community.electricforum.com/u/MikeKC)
#### Post date: [August 30, 2022, 7:06pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/5 "2022-08-30T19:06:15Z")
What have you gotten yourself into this time @Inwo - LOL
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [August 30, 2022, 7:14pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/6 "2022-08-30T19:14:17Z")
There were a few 48v sevcon, one motor, 4 chargers, and a few dc-dc. Couldn’t decide what i wanted, so got them all. Only two hrs away at Tomberlin Reedsburg Wi.
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [August 30, 2022, 7:15pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/7 "2022-08-30T19:15:26Z")
Coil overs may be useful. I can measure cc of eyes.
New gems could use the tubs maybe. Freebies.
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [August 30, 2022, 7:17pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/8 "2022-08-30T19:17:45Z")
Fun project for the pmac motors. No?
Or just a test mule.
Can be much less money. Haven’t looked them over much.
How about rear wheel drive for classic gems?
With easy steer front end. Tomberlin geometry rules.
---
### Author:  [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)
#### Post date: [August 31, 2022, 2:03am UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/9 "2022-08-31T02:03:34Z")
I need a bigger garage
---
### Author:  [@haroldfrank1945](https://community.electricforum.com/u/haroldfrank1945)
#### Post date: [September 7, 2022, 7:49pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/10 "2022-09-07T19:49:18Z")
Do you have any set up that you would sell for me to repower my Anvil? Thanks Harold
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [September 7, 2022, 9:00pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/11 "2022-09-07T21:00:27Z")
The cars are less electrics.
The Kinetek motor in the Anvil is the motor I would use for high performance. It will run near 50mph.
The Pmac would be loads of fun if 35-40 is fast enough.
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [September 11, 2022, 7:57am UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/12 "2022-09-11T07:57:02Z")
Did someone ask about building a dolly?
> **[Log into Facebook](https://www.facebook.com/marketplace/item/1289098581627011/)**
>
> Log into Facebook to start sharing and connecting with your friends, family, and people you know.
---
### Author:  [@haroldfrank1945](https://community.electricforum.com/u/haroldfrank1945)
#### Post date: [September 28, 2022, 6:35pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/13 "2022-09-28T18:35:44Z")
Could you give me any help on anvil with a kinetek kcca 0087-b throwing a 1-7 code? Thanks Harold
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [September 28, 2022, 9:06pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/14 "2022-09-28T21:06:01Z")
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [September 28, 2022, 9:16pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/15 "2022-09-28T21:16:20Z")
I have sw and one dongle. Can only sell it to someone buying a pallet of new controllers.
No time to learn it myself. If you can talk a long time member into helping you, I will lend with deposit.
We can program a Sevcon controller to work with your motor. About $1500.
Need:
1. Throttle wiper values and fs1 active high or active low
2. Custom settings. Regen, D1 and D2
3. Wire F-R switches to active low.
Motor connections are same as our conversions. Encoder and thermistor.
MikeKc may build you a pcb to use all your wiring if you can meter out the pins at controller. It’s the same wiring as our classic Gem conversion.
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [September 28, 2022, 9:17pm UTC](https://community.electricforum.com/t/newer-tomberlin-chassis-and-parts/25034/16 "2022-09-28T21:17:35Z")
Illinois? Can you bring it to Mn. 55941?