# New PMAC thread

**URL:** <https://community.electricforum.com/t/new-pmac-thread/19268>\
**Category:** GEM Forum\
**Created:** [July 4, 2020, 9:28pm UTC](https://community.electricforum.com/t/new-pmac-thread/19268 "2020-07-04T21:28:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [July 4, 2020, 9:28pm UTC](https://community.electricforum.com/t/new-pmac-thread/19268/1 "2020-07-04T21:28:22Z")

</div>

We’re moving now.  
Installed pmac motor in my test hotrod.  
Troy’s file first to get the wheels turning. Then I configured a S6 that came with a good pmac DLD.  
Ran away on jackstands so I tested wheels down. Smooth as can be spins the tires.  
The only issue is a 10 mph creep. Heck it might go 20 at zero throttle if I wasn’t riding the brake.  
Hoping that it’s a simple throttle issue. Or for all I know I might have set a creep function.  
Thought I better post my progress in the case things go south and I end up in the hospital. 🙂

![MVC-001F](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/d/d4556525edb8c0504992360ad6c65d6e9d9fc03d.jpeg)

@grantwest better hang on to the Pmac a little longer. 🙂

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [July 19, 2020, 2:46am UTC](https://community.electricforum.com/t/new-pmac-thread/19268/2 "2020-07-19T02:46:50Z")

</div>

Fixed the regen.  
Seems to run fine to 7000rpm.  
Now I need to know what this motor will fit.  
Short and fat.  
Would someone post a picture of a pre-ramhorn Gem?  
Will an inch larger diameter fit?  
@grantwest This motor should take care of loaded hill starts by spinning the tires. 😉

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [July 19, 2020, 5:43pm UTC](https://community.electricforum.com/t/new-pmac-thread/19268/3 "2020-07-19T17:43:27Z")

</div>

You might have to cut away the battery support tray angle bracket from the frame on the passenger side.

 ![20200719_103751](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/7/7edb596aef4fde4e40ece9e5842adf0e4076f400.jpeg)  
 ![20200719_103804](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/b/bc5013f3e33d38991b8d3d8f7195d3493eea1c23.jpeg)  
 ![20200719_103756](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/3/3cc280b6d71698afcd4315c9c902d88132693c87.jpeg)