# New drive train noise developed

**URL:** <https://community.electricforum.com/t/new-drive-train-noise-developed/19614>\
**Category:** GEM Forum\
**Created:** [August 12, 2020, 1:06am UTC](https://community.electricforum.com/t/new-drive-train-noise-developed/19614 "2020-08-12T01:06:23Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [August 14, 2020, 6:12pm UTC](https://community.electricforum.com/t/new-drive-train-noise-developed/19614/9 "2020-08-14T18:12:35Z")

</div>

> [@DIY GEM GEARBOX Refurb Procedure](https://community.electricforum.com/t/diy-gem-gearbox-refurb-procedure/5584):
>
> DANA - SPICER - SCHAFFER H12 E GEAR BOX REFURBISH Don’t know if this is the proper procedure but it’s the way I do it. Remove from car and drain oil and clean exterior. Secure upside down in a vise Remove cover Remove intermediate bearing caps (Freeze Plugs) by drilling a small hole in the center and forcing them out with a sheet metal screw. Remove all snap rings. Remove the input shaft assemble by pulling it out with a pair of visegrips applied LIGHTLY to the spline Remove the input s…

---

_[View the full topic](https://community.electricforum.com/t/new-drive-train-noise-developed/19614)._
