# Need trans2 steering rack

**URL:** <https://community.electricforum.com/t/need-trans2-steering-rack/1100>\
**Category:** NEV & LSV Forum\
**Created:** [January 18, 2009, 5:10pm UTC](https://community.electricforum.com/t/need-trans2-steering-rack/1100 "2009-01-18T17:10:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![trans2](https://avatars.discourse-cdn.com/v4/letter/t/8e8cbc/32.png) [@trans2](https://community.electricforum.com/u/trans2)\
**Post date:** [January 18, 2009, 5:10pm UTC](https://community.electricforum.com/t/need-trans2-steering-rack/1100/1 "2009-01-18T17:10:34Z")

</div>

Anyone have a steering rack for a 1996 trans2 (pre GEM)? Source? It may be the same as for an early 48V GEM.

Any help appreciated.

---

<div class="post-metadata">

**Author:** ![nev.tech](https://avatars.discourse-cdn.com/v4/letter/n/b2d939/32.png) [@nev.tech](https://community.electricforum.com/u/nev.tech)\
**Post date:** [June 10, 2010, 7:47am UTC](https://community.electricforum.com/t/need-trans2-steering-rack/1100/2 "2010-06-10T07:47:41Z")

</div>

Call GEM Parts if you haven’t already - 877.447.0102 [NEV Service](http://www.nevservice.biz)

---

<div class="post-metadata">

**Author:** ![GEMmechanic](https://avatars.discourse-cdn.com/v4/letter/g/ecccb3/32.png) [@GEMmechanic](https://community.electricforum.com/u/GEMmechanic)\
**Post date:** [September 4, 2010, 9:27pm UTC](https://community.electricforum.com/t/need-trans2-steering-rack/1100/3 "2010-09-04T21:27:24Z")

</div>

What parts do you need? Rack boots are the same as a Polaris Ranger ATV part number 5412013 (exact fit for both sides, order from motorcycle/ATV dealer).  
Inner tie rod is NAPA Auto Parts number 2695088 (VW Rabbit/Jetta part), need M14/1.5 threaded sleeve to use this because the GEM is female and VW is male. If this sounds confusing, ask and I will explain how to make it.  
Outer tie rods are now available from GEM as number 0112-02946.

A new rack from GEM was $330 the last time I needed one I still have the “rack” shaft and the sector gear, but the casting was cracked when someone ran into the curb.
