# Need to program my GE D2 Ford Think controller **URL:** \ **Category:** NEV & LSV Forum\ **Created:** [August 30, 2018, 11:54pm UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439 "2018-08-30T23:54:24Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [August 30, 2018, 11:54pm UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/1 "2018-08-30T23:54:24Z")
Ford Think. I just got a D&D motor and I need to either have someone program the controller or order a kit to program it myself. It has the D2 controller. Does anyone know where I can get a kit or who I could send it to? I seen forklift electronics sells a kit to program it using a laptop. Does anyone have any experience using it? Thanks ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [August 31, 2018, 12:17am UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/2 "2018-08-31T00:17:05Z")
I have a kit with usb connection to pc. $150 Includes monitor port that stays with car. Monitor works if it’s similar to T2. Need a different kit if similar to T1. ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [August 31, 2018, 3:02am UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/3 "2018-08-31T03:02:46Z")
D2 is close to T2 Use the LS programmer or INWO’s package GEM T2 performance settings will be close. Pay attention to Gear ratio, tire diameter and speed limit settings Follow calculation instructions for speeometer and odometer settings exactly. Go here for controller manual [http://www.fsip.biz/Documents/FO2%20Tech.pdf](http://www.fsip.biz/Documents/FO2%20Tech.pdf) Note: for D&D motor I would suggest a Min Field Current (setting #7) of 62 Rodney ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [August 31, 2018, 3:09am UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/4 "2018-08-31T03:09:09Z")
> **[General Electric IC3645LXHS1 LX Handset EVC With Cable | eBay](https://www.ebay.com/itm/General-Electric-IC3645LXHS1-LX-Handset-EVC-With-Cable/113226010635?epid=1301466790&hash=item1a5ccbd00b:g:rK0AAOSwAclbhzoA)** > > General Electric IC3645LXHS1 LX Handset EVC With Cable | Business & Industrial, Automation, Motors & Drives, Control Systems & PLCs | eBay! ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [August 31, 2018, 11:37pm UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/5 "2018-08-31T23:37:52Z")
It looks identical to the T2 connector. Does it come with the software and everything I’ll need to program it? Have you sold it to anyone else with a Ford Think that has had success using it? Thanks ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [August 31, 2018, 11:39pm UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/6 "2018-08-31T23:39:25Z")
Where do I find a LS programmer? Is one better than the other? Thanks ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 1, 2018, 2:14am UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/7 "2018-09-01T02:14:59Z")
See link. Check Ebay. ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [September 2, 2018, 6:49pm UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/8 "2018-09-02T18:49:31Z")
Sorry I didn’t realize that was the LS programmer. Have you ever sold yours to anyone with a Ford Think? Does it come with the software and instructions? Thanks ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 2, 2018, 8:00pm UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/9 "2018-09-02T20:00:45Z")
Yes, it works on all ge sepex controllers with 23p plug. ---
**Author:** ![mitsured](https://avatars.discourse-cdn.com/v4/letter/m/ad7895/32.png) [@mitsured](https://community.electricforum.com/u/mitsured)\ **Post date:** [November 6, 2022, 2:33pm UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/10 "2022-11-06T14:33:55Z")
Hi @Inwo. Is there a place to buy the programmer now? ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [November 6, 2022, 2:55pm UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/11 "2022-11-06T14:55:10Z")
I have usb cable for Ge controllers. Works with all but T1. Also have the special T1 cable. $200 ---
**Author:** ![mitsured](https://avatars.discourse-cdn.com/v4/letter/m/ad7895/32.png) [@mitsured](https://community.electricforum.com/u/mitsured)\ **Post date:** [November 12, 2022, 2:00pm UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/12 "2022-11-12T14:00:56Z")
Okay great im pretty sure its a d2. ![20221103_220947](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/2/2295ca9312eb3e9f46f979280dce41586aaf2bcd.jpeg) ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [November 12, 2022, 2:29pm UTC](https://community.electricforum.com/t/need-to-program-my-ge-d2-ford-think-controller/14439/13 "2022-11-12T14:29:00Z")
The T2-T5 cable should work with that. The D2 definition file may be found here if you ask. Not sure if I have it or if it’s needed.