# Need to install the shoes on the fron of the GEN car 2000 E 8252000 gem

**URL:** <https://community.electricforum.com/t/need-to-install-the-shoes-on-the-fron-of-the-gen-car-2000-e-8252000-gem/20029>\
**Category:** Uncategorized\
**Created:** [October 10, 2020, 2:07pm UTC](https://community.electricforum.com/t/need-to-install-the-shoes-on-the-fron-of-the-gen-car-2000-e-8252000-gem/20029 "2020-10-10T14:07:08Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![eagle2271](https://avatars.discourse-cdn.com/v4/letter/e/5f9b8f/32.png) [@eagle2271](https://community.electricforum.com/u/eagle2271)\
**Post date:** [October 10, 2020, 2:07pm UTC](https://community.electricforum.com/t/need-to-install-the-shoes-on-the-fron-of-the-gen-car-2000-e-8252000-gem/20029/1 "2020-10-10T14:07:08Z")

</div>

Need to install brake shoes on 2000 gem e 825

---

<div class="post-metadata">

**Author:** ![eagle2271](https://avatars.discourse-cdn.com/v4/letter/e/5f9b8f/32.png) [@eagle2271](https://community.electricforum.com/u/eagle2271)\
**Post date:** [October 10, 2020, 2:07pm UTC](https://community.electricforum.com/t/need-to-install-the-shoes-on-the-fron-of-the-gen-car-2000-e-8252000-gem/20029/2 "2020-10-10T14:07:43Z")

</div>

need help soon. thanks

---

<div class="post-metadata">

**Author:** ![eagle2271](https://avatars.discourse-cdn.com/v4/letter/e/5f9b8f/32.png) [@eagle2271](https://community.electricforum.com/u/eagle2271)\
**Post date:** [October 10, 2020, 2:10pm UTC](https://community.electricforum.com/t/need-to-install-the-shoes-on-the-fron-of-the-gen-car-2000-e-8252000-gem/20029/3 "2020-10-10T14:10:07Z")

</div>

cant get the shoes over the pivot  
stud

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [October 10, 2020, 7:59pm UTC](https://community.electricforum.com/t/need-to-install-the-shoes-on-the-fron-of-the-gen-car-2000-e-8252000-gem/20029/4 "2020-10-10T19:59:45Z")

</div>

Put the shoes in a vice and bump the adjusters toward the inside. The adjuster is the part that goes over the pivot pin. You can notch out a relief on the hub 3/8 by 2 1/2 between the lug bolts. Later models had these relieved areas on all 4 sides of the hub.

---

<div class="post-metadata">

**Author:** ![eagle2271](https://avatars.discourse-cdn.com/v4/letter/e/5f9b8f/32.png) [@eagle2271](https://community.electricforum.com/u/eagle2271)\
**Post date:** [October 10, 2020, 9:38pm UTC](https://community.electricforum.com/t/need-to-install-the-shoes-on-the-fron-of-the-gen-car-2000-e-8252000-gem/20029/5 "2020-10-10T21:38:52Z")

</div>

did that it worked…thanks