# Need front battery tray measurments

**URL:** <https://community.electricforum.com/t/need-front-battery-tray-measurments/19167>\
**Category:** GEM Forum\
**Created:** [June 26, 2020, 11:06am UTC](https://community.electricforum.com/t/need-front-battery-tray-measurments/19167 "2020-06-26T11:06:17Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\
**Post date:** [June 26, 2020, 11:06am UTC](https://community.electricforum.com/t/need-front-battery-tray-measurments/19167/1 "2020-06-26T11:06:17Z")

</div>

Can someone give me the measurements of the front battery tray on an early Gem . The one that holds the 2 batteries . I’m designing a new lithium setup and wanting to see if it will fit entirely upfront .

Thanks

Lithium Gods

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [June 26, 2020, 7:02pm UTC](https://community.electricforum.com/t/need-front-battery-tray-measurments/19167/2 "2020-06-26T19:02:11Z")

</div>

The wells are each 7" front to back, and 16" wide, but there is a raised ridge at one side that reduces the flat bottom area to about 15" wide. The ridge is about 1/2"-3/4" high.  
Upper tray sits 3" above the lower. Hood is 20" above the tray.

---

<div class="post-metadata">

**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\
**Post date:** [June 26, 2020, 7:10pm UTC](https://community.electricforum.com/t/need-front-battery-tray-measurments/19167/3 "2020-06-26T19:10:05Z")

</div>

any chance of a picture ?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [June 26, 2020, 8:00pm UTC](https://community.electricforum.com/t/need-front-battery-tray-measurments/19167/4 "2020-06-26T20:00:42Z")

</div>

![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/7/7a94c1aaa444e3ab5e70325dfcf63df42950744c.jpeg)

> [@Chevy Bolt Battery with BMS & Charger](https://community.electricforum.com/t/chevy-bolt-battery-with-bms-charger/15386/20):
>
> Here are the pictures of the Bolt battery all in place and secured.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [June 26, 2020, 8:00pm UTC](https://community.electricforum.com/t/need-front-battery-tray-measurments/19167/5 "2020-06-26T20:00:51Z")

</div>

Sure, I can pull the batteries in a few hours or tomorrow and get a photo of the tray.

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [June 26, 2020, 8:47pm UTC](https://community.electricforum.com/t/need-front-battery-tray-measurments/19167/6 "2020-06-26T20:47:41Z")

</div>

Does this help? 2000 4 seater

 ![20200626_134253](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/e/e5710b055d220195ae55d6fc45781f3f6000546d.jpeg) ![20200626_134239](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/7/7b18400d10e40f517fce60d45c5f5a8e7766d0e5.jpeg) ![20200626_134216](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/6db2049abadc0be926be7e512bbd3a030461f95c.jpeg)

I happen to have the front end in pieces right now. If you need measurements, i can do it. Just tell me what you need measured. The frame or tray etc

---

<div class="post-metadata">

**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\
**Post date:** [June 26, 2020, 8:51pm UTC](https://community.electricforum.com/t/need-front-battery-tray-measurments/19167/7 "2020-06-26T20:51:06Z")

</div>

Those picture are perfect . looks like this lithium pack may fit entirely upfront .