# More 3D printed parts

**URL:** <https://community.electricforum.com/t/more-3d-printed-parts/28721>\
**Category:** GEM Forum\
**Created:** [December 24, 2024, 12:43am UTC](https://community.electricforum.com/t/more-3d-printed-parts/28721 "2024-12-24T00:43:17Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [December 24, 2024, 12:43am UTC](https://community.electricforum.com/t/more-3d-printed-parts/28721/1 "2024-12-24T00:43:17Z")

</div>

I wanna have my brother print up some end caps for the Square Frame ends on my 2016 E4.

 ![IMG_0871](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/0/a/0a8d4d2a4132ff2d113ffdc935a1a7a0f95327bb.jpeg)  
 ![IMG_0870](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/c/4/c4f7582058ab5d80de9fffe88e3516da0b42ed36.jpeg)

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [December 24, 2024, 12:48am UTC](https://community.electricforum.com/t/more-3d-printed-parts/28721/2 "2024-12-24T00:48:28Z")

</div>

I installed some Back up lights and was like. Humm! I gotta do something about making them look better

 ![IMG_0872](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/f/8/f8bee0b326e262916548f4d9c9ad791aec032fd0.jpeg)

---

<div class="post-metadata">

**Author:** ![BuckeyenDE](https://avatars.discourse-cdn.com/v4/letter/b/779978/32.png) [@BuckeyenDE](https://community.electricforum.com/u/BuckeyenDE)\
**Post date:** [December 24, 2024, 3:01pm UTC](https://community.electricforum.com/t/more-3d-printed-parts/28721/3 "2024-12-24T15:01:26Z")

</div>

Maybe? [https://www.amazon.com/s?k=Rectangular+Tube+Plug](https://www.amazon.com/s?k=Rectangular+Tube+Plug)

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [December 24, 2024, 6:19pm UTC](https://community.electricforum.com/t/more-3d-printed-parts/28721/4 "2024-12-24T18:19:29Z")

</div>

I was thinking that McMaster car might have something Here are the dimensions that I took  
Inner dimension (insert portion) 120.62 MM or 4.7,495 inc (tall)

43.03 or 1.6,940 inch Wide  
Outer Lip around square 3.81 or 0.1500 inc this would be the small exterior lip that would go around and cover the edge

Inner dimension. This would be thepart gos in 6.27 mm or 0.2,470  
Deep ( insert portion)