# MM Hard field data

**URL:** https://community.electricforum.com/t/mm-hard-field-data/6403
**Category:** Technical Discussions
**Created:** [October 8, 2016, 12:32pm UTC](https://community.electricforum.com/t/mm-hard-field-data/6403 "2016-10-08T12:32:07Z")
**Posts on this page:** 2
**Page:** 2

<div class="post-metadata">

### Author: ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [October 2, 2017, 8:12pm UTC](https://community.electricforum.com/t/mm-hard-field-data/6403/21 "2017-10-02T20:12:07Z")

</div>

There should be a way. As it’s done in controller. Do you have a trip odometer? Then you have a reset button. Hold it in for 15 seconds or so.

You can always just use the 1/2 setting.

---

<div class="post-metadata">

### Author: ![MPDano](https://avatars.discourse-cdn.com/v4/letter/m/848f3c/32.png) [@MPDano](https://community.electricforum.com/u/MPDano)
#### Post date: [October 2, 2017, 9:42pm UTC](https://community.electricforum.com/t/mm-hard-field-data/6403/22 "2017-10-02T21:42:19Z")

</div>

Yeah, it does have a reset button. I looked in the actual owners manual and it does state mph/kph but doesn’t provide steps to switch them. I’ll try and hold it and see if that does it.

[Previous page](https://community.electricforum.com/t/mm-hard-field-data/6403.md?page=1)