# Mirrors

**URL:** <https://community.electricforum.com/t/mirrors/5336>\
**Category:** GEM Forum\
**Created:** [September 20, 2015, 5:12pm UTC](https://community.electricforum.com/t/mirrors/5336 "2015-09-20T17:12:31Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 20, 2015, 5:12pm UTC](https://community.electricforum.com/t/mirrors/5336/1 "2015-09-20T17:12:31Z")

</div>

Gem mirrors kind of suck.

Tried to tighten them. Still small and floppy.  
Any suggestions on replacements?  
Two choices from Ebay!

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 20, 2015, 5:52pm UTC](https://community.electricforum.com/t/mirrors/5336/2 "2015-09-20T17:52:00Z")

</div>

This looks like a good buy @ \<$20 a set

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 29, 2015, 12:29pm UTC](https://community.electricforum.com/t/mirrors/5336/3 "2015-09-29T12:29:00Z")

</div>

Good enough for me!

I’ll put the old ones on Ebay.

---

<div class="post-metadata">

**Author:** ![rixgem](https://avatars.discourse-cdn.com/v4/letter/r/9d8465/32.png) [@rixgem](https://community.electricforum.com/u/rixgem)\
**Post date:** [September 30, 2015, 4:37am UTC](https://community.electricforum.com/t/mirrors/5336/4 "2015-09-30T04:37:30Z")

</div>

Can you post manufacturer or seller info? Do these just screw into existing GEM mount holes? I’d hate to make more holes in the plastic. I hate the stock mirrors as well as they are impossible to aim being so small.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 30, 2015, 7:53am UTC](https://community.electricforum.com/t/mirrors/5336/5 "2015-09-30T07:53:40Z")

</div>

I could reuse the top hole but had to add bottom hole.  
I know what you mean about adding holes. ☹

[Golf Cart Side Rear View Mirror Set Club Car Yamaha EZGO Universal Gas Electric | eBay](http://www.ebay.com/itm/291534428323?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT)

I just noticed that the ss bolts shown did not come with it. I would not have used them in any case.

The mounting base must be mounted near plumb to allow proper adjustment.  
Don’t expect too much. It’s just a plastic mirror with flat glass.

On the plus side. The mounting pad is long and flexible. It will twist to follow contour of roof arch.

---

<div class="post-metadata">

**Author:** ![Rascal](https://avatars.discourse-cdn.com/v4/letter/r/439d5e/32.png) [@Rascal](https://community.electricforum.com/u/Rascal)\
**Post date:** [October 5, 2015, 11:09pm UTC](https://community.electricforum.com/t/mirrors/5336/6 "2015-10-05T23:09:34Z")

</div>

I’ve seen some real neat ones with turn signals built in the mirror. I can’t remember where…?

---

<div class="post-metadata">

**Author:** ![IssaquahWA1979](https://avatars.discourse-cdn.com/v4/letter/i/91b2a8/32.png) [@IssaquahWA1979](https://community.electricforum.com/u/IssaquahWA1979)\
**Post date:** [November 2, 2015, 3:30pm UTC](https://community.electricforum.com/t/mirrors/5336/7 "2015-11-02T15:30:55Z")

</div>

I am new to the forum but I purchased mine on Amazon. Search for “10L0L.EZGO Club Car Yamaha Gas & Electric Golf Carts Side Rear View Mirror Set With turn signals” as I cannot post a link yet being new to the board…
