# Making keyfob activate toy

**URL:** <https://community.electricforum.com/t/making-keyfob-activate-toy/13180>\
**Category:** Do It Yourself (DIY)\
**Created:** [December 26, 2017, 4:02pm UTC](https://community.electricforum.com/t/making-keyfob-activate-toy/13180 "2017-12-26T16:02:25Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jayfaas](https://avatars.discourse-cdn.com/v4/letter/j/f08c70/32.png) [@Jayfaas](https://community.electricforum.com/u/Jayfaas)\
**Post date:** [December 26, 2017, 4:02pm UTC](https://community.electricforum.com/t/making-keyfob-activate-toy/13180/1 "2017-12-26T16:02:25Z")

</div>

I currently have a little seahorse that lights up and plays music when pressed. It plays for about 5 minutes and then stops. Im wondering if there is a remote or keyfob that I could rig to the toy so I can activate it remotely. Basically its for my infant daughter and sometimes it just needs that extra cycle to get her to sleep and I would like to do it without having to go back in her room. Any ideas?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 27, 2017, 1:07am UTC](https://community.electricforum.com/t/making-keyfob-activate-toy/13180/2 "2017-12-27T01:07:17Z")

</div>

> **[4 Channel 433MHZ RF Radio Wireless Controller Module Remote Control | eBay](https://www.ebay.com/itm/4-Channel-433MHZ-RF-Radio-Wireless-Controller-Module-Remote-Control/161320380635?epid=1219898637&hash=item258f71a8db:g:pL8AAOSwsW9Yxltn)**
>
> Note: The color of the item may vary slightly due to photography and your own computerWith a wireless key ring style remote control. 
> Specifications:
> Power: 4.5~7V
> Quiescent Current (mA): 4.5 mA
> Modulation: AM (OOK)
> Operating Temperature: -10 °...

---

<div class="post-metadata">

**Author:** ![Jayfaas](https://avatars.discourse-cdn.com/v4/letter/j/f08c70/32.png) [@Jayfaas](https://community.electricforum.com/u/Jayfaas)\
**Post date:** [December 27, 2017, 4:29am UTC](https://community.electricforum.com/t/making-keyfob-activate-toy/13180/3 "2017-12-27T04:29:57Z")

</div>

Once I get the remote, is it hard to wire it to the toy? Sorry but this would be my first

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 27, 2017, 5:24am UTC](https://community.electricforum.com/t/making-keyfob-activate-toy/13180/4 "2017-12-27T05:24:09Z")

</div>

Depends on the toy.  
It would need to be wired across the switch.  
Needs to have room in the toy for the small pcs and a 9v battery. Possibly connect to the toy’s battery, if over 4.5v.  
This is the first low cost one I ran across. May be better option.  
May be hard without basic tools. Voltmeter and soldering pencil.  
Not much to work with!
