# Magnet Replacement Question

**URL:** <https://community.electricforum.com/t/magnet-replacement-question/16967>\
**Category:** GEM Forum\
**Created:** [September 1, 2019, 2:36am UTC](https://community.electricforum.com/t/magnet-replacement-question/16967 "2019-09-01T02:36:49Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jwc](https://avatars.discourse-cdn.com/v4/letter/j/bcef8e/32.png) [@jwc](https://community.electricforum.com/u/jwc)\
**Post date:** [September 1, 2019, 2:36am UTC](https://community.electricforum.com/t/magnet-replacement-question/16967/1 "2019-09-01T02:36:49Z")

</div>

I have a 2002 e825 that I bought about a year ago. While working on the loose steering issue that I have, I discovered that my speed sensor is bad and has some broken wires. When I pulled the cap off the motor, I discovered that the magnet has a hairline crack in it that almost looks too perfect to not be normally there. Is that true or should I replace it while I’m doing the sensor?

I ‘think’ I have the D&D Blue Motor but I can’t find any markings on it. The magnet has a ‘1’ on it as well. At least I figured out why my speedometer isn’t working!

Thank you!

![11](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/3/373cb36555782d3b8101a8ecb3e99fe49b76855f.jpeg) ![43](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/2/2a275fcd3c014d0677cb474aa251ac64b9dde98f.jpeg) ![35](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/8/868a1a3f371710daed3acce077af535412d3b58c.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 1, 2019, 12:49pm UTC](https://community.electricforum.com/t/magnet-replacement-question/16967/2 "2019-09-01T12:49:59Z")

</div>

It will be interesting to find out. It looks normal to me, although I don’t know a reason it would be designed that way.  
If you’re handy, the wires could be soldered. Don’t throw it out. 🙂

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [September 2, 2019, 7:22pm UTC](https://community.electricforum.com/t/magnet-replacement-question/16967/3 "2019-09-02T19:22:23Z")

</div>

Hit the crack with crazy glue. The crack has no effect on operation.

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [September 3, 2019, 4:04am UTC](https://community.electricforum.com/t/magnet-replacement-question/16967/4 "2019-09-03T04:04:08Z")

</div>

Crack is Whack! Order a new magnet $10 on eBay say yourself being stuck with a broken magnet. And if the magnet blowes up inside the speed sensor it can scratch and gouge the speed sensor and then it’s way more the $10’to fix it
