# Magic Magnet review thread "price increase" **URL:** \ **Category:** GEM Forum\ **Created:** [February 13, 2016, 10:39am UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783 "2016-02-13T10:39:30Z")\ **Posts on this page:** 20\ **Page:** 10
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 3, 2020, 3:33pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/182 "2020-07-03T15:33:31Z")
> [@KMills24](#): > > 2018 Tuk Tuk (eTuk If it is a sepex motor with a three wire speed sensor it should work. ---
**Author:** ![Monkeyron](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/monkeyron/32/6634_2.png) [@Monkeyron](https://community.electricforum.com/u/Monkeyron)\ **Post date:** [July 4, 2020, 1:24pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/183 "2020-07-04T13:24:10Z")
David has a R4F motor I believe ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 5, 2020, 1:32pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/184 "2020-07-05T13:32:18Z")
25 posts were split to a new topic: [E Tuk continued from MM thread](https://community.electricforum.com/t/e-tuk-continued-from-mm-thread/19273) ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 5, 2020, 1:35pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/191 "2020-07-05T13:35:07Z")
A post was merged into an existing topic: [E Tuk continued from MM thread](https://community.electricforum.com/t/e-tuk-continued-from-mm-thread/19273/26) ---
**Author:** ![RogerB](https://avatars.discourse-cdn.com/v4/letter/r/d9b06d/32.png) [@RogerB](https://community.electricforum.com/u/RogerB)\ **Post date:** [September 5, 2020, 8:56pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/192 "2020-09-05T20:56:43Z")
Hi, I’m about to install the MM I bought from you a few weeks back - how do I change from MPH to KPH in a 2002 Gem please? Any hints appreciated. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 5, 2020, 9:42pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/193 "2020-09-05T21:42:30Z")
I’m not sure you can, short of reprogramming the controller. 2005 + you just press a button. In lieu of that the MM can be set to read 1/2 actual speed or -10, etc. ---
**Author:** ![RogerB](https://avatars.discourse-cdn.com/v4/letter/r/d9b06d/32.png) [@RogerB](https://community.electricforum.com/u/RogerB)\ **Post date:** [September 6, 2020, 8:56pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/194 "2020-09-06T20:56:09Z")
Ok got it - do you happen to have instructions on how to set the MM? Sounds like that will be simplest. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 6, 2020, 10:34pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/195 "2020-09-06T22:34:23Z")
All switches on should be about 1/2 speed reading. ---
**Author:** ![RogerB](https://avatars.discourse-cdn.com/v4/letter/r/d9b06d/32.png) [@RogerB](https://community.electricforum.com/u/RogerB)\ **Post date:** [September 7, 2020, 12:46am UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/196 "2020-09-07T00:46:33Z")
Great! Thanks again!, ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [March 3, 2021, 12:04am UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/197 "2021-03-03T00:04:02Z")
My costs are going up. New price is $150 ---
**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\ **Post date:** [March 3, 2021, 12:32am UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/198 "2021-03-03T00:32:17Z")
Stupid cheap. I have seen others for a lot more than that. ---
**Author:** ![StuffMD](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/stuffmd/32/5918_2.png) [@StuffMD](https://community.electricforum.com/u/StuffMD)\ **Post date:** [May 31, 2021, 3:50pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/199 "2021-05-31T15:50:18Z")
For my 2007 I had to hold the trip toggle switch down for 8-10 seconds to switch it back and fourth from MPH \<-\> KPH ---
**Author:** ![Rigrob](https://avatars.discourse-cdn.com/v4/letter/r/3be4f8/32.png) [@Rigrob](https://community.electricforum.com/u/Rigrob)\ **Post date:** [June 7, 2021, 8:53pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/200 "2021-06-07T20:53:47Z")
> [@Magic Magnet review thread "price increase"](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/193): > > I’m not sure you can, short of reprogramming the controller. 2005 + you just press a button. In lieu of that the MM can be set to read 1/2 actual speed or -10, etc. ---
**Author:** ![Mikeburnor](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@Mikeburnor](https://community.electricforum.com/u/Mikeburnor)\ **Post date:** [April 24, 2022, 7:09pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/201 "2022-04-24T19:09:30Z")
Mm 2008 gem car Stock motor 5 hp Stock controller 28 inch tires ---
**Author:** ![1998Supra](https://avatars.discourse-cdn.com/v4/letter/1/41988e/32.png) [@1998Supra](https://community.electricforum.com/u/1998Supra)\ **Post date:** [January 14, 2023, 8:04pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/202 "2023-01-14T20:04:36Z")
Hi Dave I’m new here and came across your magic magnet posts, I have a 2014 GEM and was wondering if you still made them and if you do could you please send me the info on where to send you the money to purchase one. Thank you I look forward to your reply! ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 14, 2023, 9:51pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/203 "2023-01-14T21:51:58Z")
$150 > **[Pay David Bissen using PayPal.Me](https://www.paypal.com/paypalme/INWO?country.x=US&locale.x=en_US)** > > Go to paypal.me/INWO and type in the amount. Since it’s PayPal, it's easy and secure. Don’t have a PayPal account? No worries. ---
**Author:** ![Bt67](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@Bt67](https://community.electricforum.com/u/Bt67)\ **Post date:** [March 23, 2026, 2:20am UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/204 "2026-03-23T02:20:35Z")
Good evening, I have a 2007 EL and like to purchase an MM. Do have any available? Thanks Brian ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [March 23, 2026, 7:52am UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/205 "2026-03-23T07:52:40Z")
Yes, I have good stock. > **[Pay David Bissen using PayPal.Me](https://www.paypal.com/paypalme/INWO?locale.x=en_US&country.x=US)** > > Go to paypal.me/INWO and type in the amount. Since it’s PayPal, it's easy and secure. Don’t have a PayPal account? No worries. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [March 23, 2026, 9:23am UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/206 "2026-03-23T09:23:47Z")
Previous clients can continue sending payments friends and family at old pricing. ---
**Author:** ![Bt67](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@Bt67](https://community.electricforum.com/u/Bt67)\ **Post date:** [March 23, 2026, 2:39pm UTC](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783/207 "2026-03-23T14:39:15Z")
Thanks for the fast reply. Payment has been sent Brian [Previous page](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783.md?page=9) [Next page](https://community.electricforum.com/t/magic-magnet-review-thread-price-increase/5783.md?page=11)