# Magic Magnet Remote

**URL:** <https://community.electricforum.com/t/magic-magnet-remote/25590>\
**Category:** GEM Forum\
**Created:** [December 22, 2022, 11:04pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590 "2022-12-22T23:04:10Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Garthhh](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/garthhh/32/13053_2.png) [@Garthhh](https://community.electricforum.com/u/Garthhh)\
**Post date:** [December 22, 2022, 11:04pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/1 "2022-12-22T23:04:10Z")

</div>

2013 GEM e2 es GE 5hp

Can there be a bypass switch for the Magic Magnet?  
Will the MM object [release smoke or otherwise become non-functional] to being powered up with no load on the in or out signal wire?  
What about extending the MM wires into the cab?

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [December 22, 2022, 11:33pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/2 "2022-12-22T23:33:54Z")

</div>

Why would you want to do such a thing?

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [December 22, 2022, 11:36pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/3 "2022-12-22T23:36:08Z")

</div>

Magic magnet. You?

Finally got tired of going 25 and holding up traffic? 🤣

I suppose you could extend the wires. Maybe install a multi pole switch to allow you to go back and forth between modes.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [December 22, 2022, 11:37pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/4 "2022-12-22T23:37:21Z")

</div>

@AssyRequired  
I’m thinking maybe he has a driver in the house that he doesn’t want going 35 in an over grown golf cart.

Dont most performance / sport autos have a kid/valet mode that wont let the driver go hooning?

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [December 22, 2022, 11:41pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/5 "2022-12-22T23:41:03Z")

</div>

Some creative wiring and a keyed switch on the h/l feed wires would fix that.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [December 22, 2022, 11:42pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/6 "2022-12-22T23:42:34Z")

</div>

YESSSS!!! Worlds first GEM with a track key.

😂

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [December 23, 2022, 12:06am UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/7 "2022-12-23T00:06:01Z")

</div>

Down here in Newport Beach that is a Valet Key.  
Can’t have them going all Ferris Bueller with the hotrod!

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 23, 2022, 12:49am UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/8 "2022-12-23T00:49:52Z")

</div>

Only need to switch the green signal wire from motor.  
Use two poles to break both green wires to mm.  
Open circuit is fine.  
Dpdt should do it.  
I could also buid one special with a remote dip switch, i guess.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [December 23, 2022, 6:36am UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/9 "2022-12-23T06:36:55Z")

</div>

> [@AssyRequired](#):
>
> Down here in Newport Beach that is a Valet Key.  
> Can’t have them going all Ferris Bueller with the hotrod

Yeah, the cripple-key(per).

Up here in NorCal where we still have racetracks, we call them track keys. They go vroom-vroom better than the regular key. Nieener. Nieener.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 23, 2022, 1:35pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/10 "2022-12-23T13:35:06Z")

</div>

Most of the mm have the switch exposed above the potting.  
It can be broken off exposing 6 pins. 3 are common ground. 3 are 1, 2, 3.  
3 has the largest affect. Solder 2 small wires to ground and 3, then route to a simple on-off switch.  
Two get back to original 1+2 setting, bend the #1 pins toward each other and solder.  
I will do it if sent to me prepaid return, for the experience.

---

<div class="post-metadata">

**Author:** ![Garthhh](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/garthhh/32/13053_2.png) [@Garthhh](https://community.electricforum.com/u/Garthhh)\
**Post date:** [December 23, 2022, 10:52pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/11 "2022-12-23T22:52:06Z")

</div>

The basic idea is to be able to use a relay wired into DL to bypass MM.  
I was just clarifying that the MM isn’t harmed by the signal wire being open, with the power on  
DL is 15mph which is what the school zones are in Reno, I live in the middle of several blocks of Pedestrian Safety Zones with 20mph speed limits, which are targets of enhanced enforcement depending on the time of the month

With the dip switches wired remote, some relay logic, various levels of speed control would be possible

Last I saw the MM price is $135, how much extra $ and lead time for remote dipswitch setup?

1/2 pedal = 25mph on flat ground  
20mph, full pedal for overpasses & hills, I’m guessing is due to reduced pack voltage/current more than T4 settings or motor  
I don’t have enough battery to go faster, nor am I convinced of the need…  
I think if you are getting one finger salutes, you waited too long to let them pass or should choose a different route

GEMs are no different than any other, machine, make em work harder, they break more often, in new & exciting ways.

Malicious Compliance. certainly is a source of entertainment here, at the very least allows JrJava to try out new material

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 24, 2022, 1:06am UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/12 "2022-12-24T01:06:54Z")

</div>

I can get one out next day. However that will be Monday now.  
Remember that the mm will not reduce the speed limit.  
However it can double the limit of turf mode.  
Also it has no affect on power it only raises the limit.  
Open circuit is not a problem.

On a side note. You can connect to remote relays such as rfid or key fobs.

---

<div class="post-metadata">

**Author:** ![Garthhh](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/garthhh/32/13053_2.png) [@Garthhh](https://community.electricforum.com/u/Garthhh)\
**Post date:** [December 30, 2022, 6:02pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/13 "2022-12-30T18:02:14Z")

</div>

Is the Turf DL Profile for the controller output different than the DH profile?  
Current, Voltage, Field, Ramp, regen…  
Is running for extended periods, 1/2 pulses in turf mode going to heat up the motor or T4 controller?

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [December 30, 2022, 6:21pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/14 "2022-12-30T18:21:16Z")

</div>

Turf is not really a profile/table/curve swap. It’s just an altered top speed setting.  
It should do about the same thing as running half pedal.

Are you currently running into a heat problem? (controller or motor?)

---

<div class="post-metadata">

**Author:** ![Garthhh](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/garthhh/32/13053_2.png) [@Garthhh](https://community.electricforum.com/u/Garthhh)\
**Post date:** [December 30, 2022, 8:57pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/15 "2022-12-30T20:57:58Z")

</div>

No problems, just curious  
Before I accidentally let the smoke out of an expensive part  
I can’t perceive any difference in launch behavior in DL

---

<div class="post-metadata">

**Author:** ![DaveM](https://avatars.discourse-cdn.com/v4/letter/d/67e7ee/32.png) [@DaveM](https://community.electricforum.com/u/DaveM)\
**Post date:** [April 25, 2023, 8:53pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/16 "2023-04-25T20:53:38Z")

</div>

Good afternoon all, new guy to this so please don’t kill me. I have a stock 2002 four seater and would like to get a bit more speed. Is the Magic Magnet still available? Will it work on my car. Where do I purchase it from? Thanks for any help

---

<div class="post-metadata">

**Author:** ![Garthhh](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/garthhh/32/13053_2.png) [@Garthhh](https://community.electricforum.com/u/Garthhh)\
**Post date:** [April 25, 2023, 11:24pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/17 "2023-04-25T23:24:03Z")

</div>

After installing the new pack  
Smokes the tires in DH off the line, in DL not so much as a chirp  
I’m wondering if there are negative consequences of starting in low & switching to high once I’m rolling, beyond wearing out the direction switch?

---

<div class="post-metadata">

**Author:** ![Garthhh](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/garthhh/32/13053_2.png) [@Garthhh](https://community.electricforum.com/u/Garthhh)\
**Post date:** [April 25, 2023, 11:29pm UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/18 "2023-04-25T23:29:12Z")

</div>

Contact [Electric Forum](https://community.electricforum.com/u/Inwo) to purchase a Magic Magnet  
The Magic Magnet effectively removes the governor so your GEM will go as fast as your motor, gearbox & batteries will allow

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [April 26, 2023, 12:31am UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/19 "2023-04-26T00:31:42Z")

</div>

> [@Garthhh](#):
>
> Smokes the tires in DH off the line, in DL not so much as a chirp  
> I’m wondering if there are negative consequences of starting in low & switching to high once I’m rolling, beyond wearing out the direction switch?

Not at all. You can also program higher speed in turf mode or less acceleration in high.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [April 26, 2023, 12:34am UTC](https://community.electricforum.com/t/magic-magnet-remote/25590/20 "2023-04-26T00:34:15Z")

</div>

> [@DaveM](#):
>
> the Magic Magnet still available? Will it work on my car. Where do I purchase it from? Thanks for any help

$135

> **[Pay David Bissen using PayPal.Me](https://www.paypal.com/paypalme/INWO?country.x=US&locale.x=en_US)**
>
> Go to paypal.me/INWO and type in the amount. Since it’s PayPal, it's easy and secure. Don’t have a PayPal account? No worries.

[Next page](https://community.electricforum.com/t/magic-magnet-remote/25590.md?page=2)
