# Looking for tips to free motor from spline shaft **URL:** \ **Category:** GEM Forum\ **Created:** [November 2, 2022, 2:56pm UTC](https://community.electricforum.com/t/looking-for-tips-to-free-motor-from-spline-shaft/25362 "2022-11-02T14:56:51Z")\ **Posts on this page:** 1\ **Showing post:** 35
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [November 3, 2022, 9:26pm UTC](https://community.electricforum.com/t/looking-for-tips-to-free-motor-from-spline-shaft/25362/35 "2022-11-03T21:26:49Z")
READ THIS > [@2013 Motor Stuck on Shaft. Any advice?](https://community.electricforum.com/t/2013-motor-stuck-on-shaft-any-advice/22354): > > [IMG\_5093] [IMG\_5096] [IMG\_5100] I was trying to replace the motor on my 2013 Gem E6 but this thing won’t budge. Took all proper bolts out, motor spins but the splines are seized together I went out and bought a heat torch today but no luck. In my attempt to remove it after I applied an extensive amount of heat I wound up cracking this piece off and the motor still won’t budge. Not a clue where to go from here. Wish I had just left the motor it ran fine but I had a motor 5 … --- _[View the full topic](https://community.electricforum.com/t/looking-for-tips-to-free-motor-from-spline-shaft/25362)._