# Looking for advice on brake lines

**URL:** <https://community.electricforum.com/t/looking-for-advice-on-brake-lines/28501>\
**Category:** GEM Forum\
**Created:** [October 24, 2024, 4:52pm UTC](https://community.electricforum.com/t/looking-for-advice-on-brake-lines/28501 "2024-10-24T16:52:28Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pythan](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@Pythan](https://community.electricforum.com/u/Pythan)\
**Post date:** [October 24, 2024, 4:52pm UTC](https://community.electricforum.com/t/looking-for-advice-on-brake-lines/28501/1 "2024-10-24T16:52:28Z")

</div>

I have picked a spot at the back and welded up a bracket system for the pedal and MC. Now I have to run all new brake lines and looking for any “gotcha” items I may run into. I know no sharp bends, and I have the flare tool and bender. I have done copper plumbing but nothing like tiny brake lines. I have the T’s and flex lines from the original system.

Any advice???

Thanks in advance!

 ![20241024_093333](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/c/1/c1038d330ed193570dc8d702bddf402008096f46.jpeg)