# Led tester/ 27v continuity

**URL:** <https://community.electricforum.com/t/led-tester-27v-continuity/15025>\
**Category:** Do It Yourself (DIY)\
**Created:** [December 3, 2018, 8:44pm UTC](https://community.electricforum.com/t/led-tester-27v-continuity/15025 "2018-12-03T20:44:51Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 3, 2018, 8:44pm UTC](https://community.electricforum.com/t/led-tester-27v-continuity/15025/1 "2018-12-03T20:44:51Z")

</div>

I built similar with a switch to change profiles in DeltaQ chargers.  
It has become so useful that I made one without the switch. Testing leds was a two person job. One to push the switch.  
A kid is stopping in today or tomorrow to learn how to fix led tvs. Made it for him, but it’s too nice. Let him make his own. 🙂  
Three 9v batteries, ~1k resistor to limit 30ma current, led indicator, shrink wrap.  
Easy-peazy project. ![MVC-001F](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/e/ed2d18e052452eeb68b8c25bb7f24ff7e0e55d69.jpeg) ![MVC-002F](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/e/e13e6645147bc3e93ae0f8aea72b19d24c4d8d78.jpeg) ![MVC-003F](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/a/a51cb78c0870daf11dafc3044bdbe85d32813e0f.jpeg) ![MVC-004F](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/e/e96623249f1f53f1a546cb2334ae7437fc9da182.jpeg) ![MVC-005F](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/7/7c5493fa9e974ac23970334c260b060e5b296820.jpeg) ![MVC-006F](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/6cc6395fc783707870f19189fbc875be1e2d0331.jpeg)
