# LCD broken or needs resetting? **URL:** \ **Category:** GEM Forum\ **Created:** [August 22, 2019, 11:30pm UTC](https://community.electricforum.com/t/lcd-broken-or-needs-resetting/16899 "2019-08-22T23:30:54Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![thetube](https://avatars.discourse-cdn.com/v4/letter/t/f05b48/32.png) [@thetube](https://community.electricforum.com/u/thetube)\ **Post date:** [August 22, 2019, 11:30pm UTC](https://community.electricforum.com/t/lcd-broken-or-needs-resetting/16899/1 "2019-08-22T23:30:54Z")
2013 GEM E6 This cart works great but the display is dim and doesn’t work. ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/b/bdbc75f5d5f151d3f1328b082d3a6d50a4c82b78.jpeg) ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/b/b5fad32114e5e777b354402305400d35cdb09a9f.jpeg) Has When I plug it in the dash lights come on but very dim and the charging indicator does not change like it should. When I drive the car the dash lights are very dim and none of the information is shown; no speed, no charge, can’t toggle between miles and trip miles. Is there a way to test to see if it’s broken vs needs resetting? ---
**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\ **Post date:** [August 23, 2019, 11:36pm UTC](https://community.electricforum.com/t/lcd-broken-or-needs-resetting/16899/2 "2019-08-23T23:36:45Z")
There are a bunch of settings you can adjust using the display and the turn signal but the only one I know how to use is the adjustment of the battery level meter. I don’t think there is much documentation on what all the other adjustable setting are. ---
**Author:** ![Musica123](https://avatars.discourse-cdn.com/v4/letter/m/3be4f8/32.png) [@Musica123](https://community.electricforum.com/u/Musica123)\ **Post date:** [September 7, 2019, 1:21am UTC](https://community.electricforum.com/t/lcd-broken-or-needs-resetting/16899/3 "2019-09-07T01:21:38Z")
Hi Mike - how do you adjust the battery indicator (LCD)? Thanks ---
**Author:** ![RS\_E6](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/rs_e6/32/12308_2.png) [@RS\_E6](https://community.electricforum.com/u/RS_E6)\ **Post date:** [September 7, 2019, 2:13am UTC](https://community.electricforum.com/t/lcd-broken-or-needs-resetting/16899/4 "2019-09-07T02:13:02Z")
> [@Battery display always indicates empty (one bar)](https://community.electricforum.com/t/battery-display-always-indicates-empty-one-bar/12799/2): > > Turn the key on. Push and release the TRIP/ODOMETER switch until it’s showing the odometer. While holding the switch down, turn the RIGHT signal on, then the LEFT signal, then return the blinker to the center. Release the TRIP/ODOMETER switch. You should be seeing data (P0105) on the display now. Turn the RIGHT signal on, then off repeatedly until the display reads: SOC (State Of Charge). Push and release the TRIP/ODOMETER switch. Now it’s remaining capacity in percent. You can now raise (or low… ---
**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\ **Post date:** [September 7, 2019, 2:47am UTC](https://community.electricforum.com/t/lcd-broken-or-needs-resetting/16899/5 "2019-09-07T02:47:57Z")
Yep as stated above ^^